Signature Hardware Engel Tempered Glass Shelf Installation

Download this manual

ENGEL TEMPERED GLASS SHELF INSTALLATION

BEFORE YOU BEGIN

We recommend consulting a professional if you are

unfamiliar with installing this type of product. Signature

Hardware accepts no liability for any damage to the

product, mounting surface, or for personal injury during

installation.

Observe all local plumbing and building codes.

Unpack and inspect the product for shipping damage. If

any damage is found, contact our Customer Relations

team at 1-866-855-2284.

GETTING STARTED

Ensure that you have gathered all the required

materials that are needed for the installation.

TOOLS AND MATERIALS:

Phillips

Flathead

Screwdriver

Level

Tape Measure

Engel Tempered Glass Shelf Installation Instructions

SKU(s): 916693

Drill

Pencil

Need help?

Do you have a question about the Engel Tempered Glass Shelf and is the answer not in the manual?

Page 1 Unpack and inspect the product for shipping damage. If any damage is found, contact our Customer Relations team at 1-866-855-2284. Level Tape Measure Pencil GETTING STARTED Ensure that you have gathered all the required materials that are needed for the installation. Engel Tempered Glass Shelf Installation Instructions...
Page 2 Important: If drilling through tile, ensure that you use a masonry drill bit and drill slowly to avoid cracking. corner corner Engel Tempered Glass Shelf Installation Instructions...
Page 3 5. Attach the mounting brackets to the installed 6. Slide the glass shelf into the installed mounting anchors using the provided screws. brackets. Tighten the set screws underneath to secure and ﬁnish the installation. corner corner Engel Tempered Glass Shelf Installation Instructions...

916693