Table of Contents
Advertisement
Quick Links
Installation Manual
model # 30324
M o u n t i n g
S y s t e m s
Dual Arm Tilt/LCD Mount
Fits Displays 13" to 32''
Supports Up to 50 lbs (23 kgs)
Projection from Wall from 3" to 17"
Meets VESA Standards 50/75/100, 100x200, 200x200
Systems Trading Corporation
450 7th Avenue Suite 2809, New York, NY 10123
Phone: (212) 239-8230
Toll Free: (800) 293-2923 Email: customerservice@stcny.com
Advertisement
Table of Contents
Related Manuals for STC SPACE SAVER 30324
Summary of Contents for STC SPACE SAVER 30324
- Page 1 Installation Manual model # 30324 M o u n t i n g S y s t e m s Dual Arm Tilt/LCD Mount Fits Displays 13” to 32’’ Supports Up to 50 lbs (23 kgs) Projection from Wall from 3” to 17” Meets VESA Standards 50/75/100, 100x200, 200x200 Systems Trading Corporation 450 7th Avenue Suite 2809, New York, NY 10123...
-
Page 2: Table Of Contents
BEFORE YOU BEGIN, MAKE SURE YOU CAREFULLY READ AND UNDERSTAND THE INSTRUCTIONS IN THIS MANUAL. This bracket system incorporates a slide mount design. Our goal is to make this installation easy for you. Please follow the instructions in the order presented in this manual and be sure to observe all warnings and cautions. -
Page 3: Unpack
Make certain the following installation hardware and components are included. If any of the parts are missing or damaged please contact STC Customer Care at (800) 293-2923. Parts are not shown actual size. M4 x 8mm safety screw M4/M5 large spacer... -
Page 4: Identify Display Back Style, Screw Diameter And Depth
identify Unplug your display before you begin. Invert the display and place it on a soft, padded, at surface. To ensure proper mounting of the brackets to your display, we have provided several sizes of screws and spacers that can be used in combination. Combinations are determined by the display back style (the area surrounding the mounting holes) and the diameter and depth of those holes. -
Page 5: Attach To Vesa 50, 75 And 100
attach to VESA 50, 75 and 100 Tighten screws so mount is rmly attached to the display. DO NOT OVER TIGHTEN. Over tightening may damage your display. VESA 50 x 50 VESA 75 x 75 Place spacer directly on mounting holes of recessed display back. -
Page 6: Add Extension Wings
add extension wings M4 x 8mm screw Use eight M4 x 8mm screws to attach extension wings to mount. Extension wings have threaded inserts. Tighten screws so wings are rmly attached. DO NOT OVER TIGHTEN. Over tightening can damage screws, greatly reducing holding power. 5 of 12 www.stcny.com... -
Page 7: Attach To Larger Displays
attach to larger displays VESA 100 x 200 VESA 200 x 200 Place spacer directly on mounting holes of recessed display back. Tighten screws so mount is rmly attached. DO NOT OVER TIGHTEN. Over tightening may damage your display. 6 of 12 www.stcny.com... -
Page 8: Wall Placement
The hardware included is suitable for mounting to walls made of brick, solid concrete, concrete block or wood studs covered with drywall. If your mounting situation is di erent, please consult a quali ed installer or contact STC Customer Care at (800) 293-2923. -
Page 9: Attach To Wood Stud
Failure to observe all safety precautions can result in serious physical injury and/or property damage. Consult a professional installer or call STC Customer Care at (800) 293-2923 if you have any questions. -
Page 10: Attach To Masonry Walls
Avoid drilling near electrical wiring and water pipes. Mount must be attached to a weight bearing wall. Failure to observe all safety precautions can result in serious physical injury and/or property damage. Consult a professional installer or call STC Customer Care at (800) 293-2923 if you have any questions. CAUTION: Wear safety glasses when operating power tools. -
Page 11: Mount Display To Wall Plate
mount NOTE: Plug in cables before mounting the display as they may be di cult to reach afterwards. Gently lower display on wall plate. Use two people to lift larger displays. secure Use M4 x 8mm safety screw to secure. 10 of 12 www.stcny.com... -
Page 12: Adjust
adjust Use two people when adjusting larger displays. Hold display before loosening knob, and continue to hold until you have tightened the knob again. Make sure teeth in VESA plate and mount line up before tightening. Loosen knob enough to seperate the VESA plate from the mount. Rotate VESA plate and adjust tilt. -
Page 13: Warranty
LIFETIME WARRANTY STC warrants that it will replace or repair this item, at its sole discretion, free of charge, should it prove defective in materials or workmanship. If a claim is made under this warranty, the mount should be returned, freight prepaid, with the original purchase receipt to your dealer or to a Space Saver distributor.
Need help?
Do you have a question about the SPACE SAVER 30324 and is the answer not in the manual?
Questions and answers