Functional Description - Makita DRV150 Instruction Manual

FUNCTIONAL DESCRIPTION

CAUTION:
Always be sure that the tool is
switched off and the battery cartridge is removed
before adjusting or checking function on the tool.
Installing or removing battery cartridge
CAUTION:
Always switch off the tool before
installing or removing of the battery cartridge.
CAUTION:
Hold the tool and the battery car-
cartridge.
Fig.1: 1. Red indicator 2. Button 3.
CAUTION:
Always install the battery cartridge
fully until the red indicator cannot be seen.
CAUTION:
Do not install the battery cartridge
forcibly.
Indicating the remaining battery capacity
Only for battery cartridges with the indicator
Fig.2: 1.
light up for a few seconds.
Indicator lamps
Lighted Off
2.
Remaining
capacity
Blinking
Charge the
malfunctioned.
NOTE: Depending on the conditions of use and the
Tool / battery protection system
Overload protection
the tool off and stop the application that caused the tool
Overheat protection
Overdischarge protection
Switch action
WARNING:
tridge into the tool, always check to see that the
switch trigger actuates properly and returns to
the "OFF" position when released.
Fig.3: 1. Switch trigger
returns to the initial position.
-
tool.
Lighting up the front lamp
Fig.4: 1. Lamp
CAUTION:
source of light directly.
Pull the switch trigger to light up the lamp. The lamp
releasing the switch trigger.
NOTE:
the lamp. Be careful not to scratch the lens of lamp, or
6 ENGLISH
Before installing the battery car-
Do not look in the light or see the
-
-
-