NexxTech 1511217 User Manual page 9

3. Please wait while Windows configures
DisplayLink Core Software .
Your screens may temporarily go black or
flash during this process.
4. When finished, the installation screen will
disappear and you will return
to your desktop .
5 . Connect the USB to HDMI
your computer and monitor .
6. When you press the power button on device, the
following window will appear .
Please wait while DisplayLink software
is configured for first use. Your screens may
temporarily go black or flash during this process.
Please click "OK" to start to use USB to HDMI
Adapter.
7. You can change the appearance of your
displays with the Windows key. Additional
controls are available in Windows
Orientation (portrait, landscape, rotated
portrait, and rotated landscape) .
8. To control the behaviour of an attached
DisplayLink device (or screen), it
is possible to use Windows Key+P
to display a menu (and cycle through it)
to allow:
Disconnect Projector, Duplicate, Extend,
Projector Only.
*Actual strings depend on your
operation system. These screen shots
are from Windows
slightly for each operation system.
Adapter to
®
7:
®
7 and might vary
®
®
8