On Windows Xp - NexxTech 1511217 User Manual

On Windows XP

Caution: DO NOT connect the USB to HDMI
provided driver.
Follow the procedures below to install the driver and then connect the adapter:
1. Insert the provided CD into your disc drive. You may see the License Agreement screen prompted
as below . Please click on I Accept to start the Driver installation.
Note:
If the installer program doesn't run automatically, please locate and double-click on the Autorun.exe
file in the CD to launch the install program.
2. Please wait while Windows configures
DisplayLink Core Software . Your screens may
temporarily go black or flash during this process.
*Actual strings depend on your operation system.
These screen shots are from Windows
might vary slightly for each operation system.
3. You must restart your computer before the new setting will take effect.
4. When finished, the installation screen will disappear and you will return to your desktop.
5 . Connect the USB to HDMI
6. Press the Power button on device, you will see the DisplayLink
Manager Icon in system tray. Click on the icon to bring up the menu.
®
Adapter to your computer before you install the
®
XP and
®
Adapter to your computer and monitor.
®
- Extend Mode: The screen is part
of the extended desktop.
- Mirror Mode: The screen copies
the contents of the primary screen.
- Off Mode: The screen is black.
- Set as Main Monitor: The screen
is the primary screen.
11