Download Print this page

Dexcowin iRay D3 Quick Start Instructions

Hide thumbs Also See for iRay D3:

Attention : Quick Start guide does not summarize all aspects of product usage. It is only intended to

give a brief overview on how to use the product out of the box. Please refer to the user

manual for more in depth information about the product, how to properly store it when it is

not in use, and how to properly maintain the product and prevent mishandling.

1. Setting

 Insert the battery pack into unit and turn on.

 Check the charge of battery-pack to make sure X-ray device is ready for exposure.

 When checking the charge of the battery-pack, change the battery-pack if the battery charge is

less

than 1 (out of 3 bars).

 Fix the distance between patient and the X-ray cone at 5cm.

 Use paralleling technique.

Instruction for Quick Start

fig 1 Paralleling Technique

fig 2 Front Teeth

fig 3 Back Teeth

Table of Contents

Do you have a question about the iRay D3 and is the answer not in the manual?

Page 1 Instruction for Quick Start Attention : Quick Start guide does not summarize all aspects of product usage. It is only intended to give a brief overview on how to use the product out of the box. Please refer to the user manual for more in depth information about the product, how to properly store it when it is not in use, and how to properly maintain the product and prevent mishandling.
Page 2 3. EXP Time Settings and Adjustments Brigtness of an image depends on  distance and angle between X-ray and film.  Exposure time may vary depending on patient and/or film.  Different film print methods can be factor in exposure time settings. ...