Code Blue CB 6 Series Administrator's Manual

Hide thumbs Also See for CB 6 Series:

Advertisement

Quick Links

CB 6 Series
CB 6-s
CB 6-f
Installation | Configuration | Operation | Troubleshooting
Administrator Guide
800.205.7186
www.codeblue.com

Advertisement

Table of Contents
loading
Need help?

Need help?

Do you have a question about the CB 6 Series and is the answer not in the manual?

Questions and answers

Summary of Contents for Code Blue CB 6 Series

  • Page 1 CB 6 Series CB 6-s CB 6-f Installation | Configuration | Operation | Troubleshooting Administrator Guide 800.205.7186 www.codeblue.com •...
  • Page 2 OR OTHER INFORMATION CONTAINED HEREIN OR THE USE THEREOF. Code Blue Corporation reserves the right to make any modifications to this guide or the information contained herein at any time without notice. The software described herein may also be governed by the terms of a separate user license agreement.
  • Page 3: Table Of Contents

    5 Power Requirements..............8 6 Software Configuration..............10 7 CB 6 Series Installation Instructions........... 11 8 CB 6 Series Remote Mount Beacon Strobe Installation.... 12 9 S-1000/S-1050 Installation Instructions........13 10 PoE Installation Instructions............15 11 CB 6 Series Pole Mount Installation Instructions.......16 12 CB 6 Series 24V Standard Wiring..........
  • Page 4: Introduction

    The rugged stainless steel and high-density polyethylene housings, along with Code Blue’s speakerphone system, meets the need for a vandal-resistant unit while providing a cost effective and reliable solution.
  • Page 5 CB 6 Series Administrator Guide This guide contains all of the Code Blue CB 6 Series information for the CB 6-s and CB 6-f. This guide contains a general overview of the Code Blue CB 6 Series options and its application, installa- tion and wiring.
  • Page 6: Getting Started

    1. EIA/TIA, ANSI, CSA and BICSI cabling or similar standards shall be adhered to for proper operation of Code Blue communication devices connected to copper or fiber infrastructures. Communications cable and electrical cable in the same conduit is not an acceptable instal- lation and shall not be supported.
  • Page 7: Spare Parts

    Part Number Faceplate Screws 41544 (6pk) Manifold R/B 5-way 40101 Analog Surge Suppressor 41471 IP Surge Suppressor 41421 CB 6 Series Additional Options Part Part Number Pole Mount kit 40027 Remote Mount Beacon/Strobe Kit 40525 PoE Power Splitter Kit Assembly 41574...
  • Page 8: Power Requirements

    CB 6 Series Administrator Guide 5 Power Requirements (The following power requirements include the 6 Series and also ALL OTHER Code Blue units.) Code Blue 259 Hedcor Street Holland, MI 49423 USA 800.205.7186 www.codeblue.com page 8 of 26 GU-156-I •...
  • Page 9 CB 6 Series Administrator Guide Code Blue 259 Hedcor Street Holland, MI 49423 USA 800.205.7186 www.codeblue.com page 9 of 26 GU-156-I • • • •...
  • Page 10: Software Configuration

    A sophisticated emergency management platform for your blue light phone network, ToolVox offers unique real-time monitoring and provisioning options for emergency phones and public address speakers, effectively acting as a hub for connecting Help Points and other Code Blue devices. Us- ® ing our proprietary incident response software, Blue Alert MNS and EMS, you can send alerts via ®...
  • Page 11: Cb 6 Series Installation Instructions

    CB 6 Series Administrator Guide 7 CB 6 Series Installation Instructions PRE-INSTALLATION 1.1 Electrical preparation – The unit may have supply wires run from either (a) behind the unit through the wall, or (b) below the unit using an external conduit through the bottom of the unit’s back plate.
  • Page 12: Cb 6 Series Remote Mount Beacon Strobe Installation

    CB 6 Series Administrator Guide 8 CB 6 Series Remote Mount Beacon Strobe Installation ATTACH J-BOX TO THE POLE Thread the banding (B) through the pole bracket (A) located on the backside of the J-box (C). Wrap the banding around the pole. Cut the banding to desired length.
  • Page 13: 1000/S-1050 Installation Instructions

    CB 6 Series Administrator Guide 9 S1000/1050 Installation Instructions NOTE: Instructions pertain to Model S-1000 LED Beacon/Strobe and Model S-1050 LED Beacon/Strobe only M3159-R/BK POSITIVE (12-24V DC or AC) BLACK COMMON (GROUND) M3159-Y/Y YELLOW (FLASH MODE) DRY CONTACT CLOSED = "ON"...
  • Page 14 CB 6 Series Administrator Guide PROGRAMMING PRIMARY & SECONDARY MODES 1. Remove power from unit. 2. Short the Yellow wires together. 3. Restore power to the unit and wait until the unit begins to flash. Once the unit begins to flash, remove the short.
  • Page 15: Poe Installation Instructions

    CB 6 Series Administrator Guide 10 PoE Installation Instructions PoE extractor. Code Blue 259 Hedcor Street Holland, MI 49423 USA 800.205.7186 www.codeblue.com page 15 of 26 GU-156-I • • • •...
  • Page 16: Cb 6 Series Pole Mount Installation Instructions

    CB 6 Series Administrator Guide 11 CB 6 Series Pole Mount Installation Instructions 1.0 THREAD MOUNTING STRAPS THROUGH SLOTS – Use outside slots for larger poles and inside slots for smaller poles. 2.0 HOLD BRACKET TO POLE – Set the height of the bracket (C) so that the speakerphone push button(s) on the unit will be at desired height (please check with local codes for ADA compliance).
  • Page 17: Cb 6 Series 24V Standard Wiring

    CB 6 Series Administrator Guide 12 CB 6 Series 24V Standard Wiring ⼀ ⴀ ⴀ Product wiring diagram shown reasonably represents current offering and is intended to assist in component identification and service. Earlier product production may have different components and wiring connections. Reference the model and serial number from the unit ID tag and contact manufacturer to confirm replacement part version and availability.
  • Page 18: Wm-180 Wall Mount Installation Instructions

    IP Controller board. Reference IA4100 Admin and User Guide for programming of analog controller board. Reference IP5000 Admin and User Guide for programming of IP controller board. Code Blue Guides are located at www.codeblue.com > support > downloads. WITHOUT CONTROLLER BOARD...
  • Page 19 CB 6 Series Administrator Guide Product wiring diagram shown reasonably represents current offering and is intended to assist in component identification and service. Earlier product production may have different components and wiring connections. Reference the model and serial number from the unit ID tag and contact manufacturer to confirm replacement part version and availability.
  • Page 20 CB 6 Series Administrator Guide 2.50 10.00 15.00 3.50 MTG HOLES 8.50 1.13 CONDUIT HOLE 4.05 2.05 7.50 BACK VIEW 20.10 15.12 10.40 Specifications subject to change without notice or obligation 1.13 CONDUIT HOLE on the part of the manufacturer.
  • Page 21: Wm-180 Pole Mount Installation Instructions

    CB 6 Series Administrator Guide 14 WM-180 Pole Mount Installation Instructions 1.0 THREAD MOUNTING STRAPS THROUGH SLOTS 2.0 HOLD BRACKET TO POLE – Set the bracket at the desired height for the Public Address Speak- ers 180°. 3.0 BAND THE BRACKET TO THE POLE AT DESIRED HEIGHT 3.1 To eliminate waste, pull band (A) from carton as needed.
  • Page 22: Maintenance Schedule

    CB 6 Series Administrator Guide 15 Maintenance Schedule LEGEND Guard tasks Technician tasks DAILY OR WEEKLY Perform functional communications check Action: Press red button Strobe activates  Red LED “Call Placed” light turns on  Message plays  Call connects, green LED “Call Received” light turns on ...
  • Page 23 Administrator Guide UNIT SURFACE MAINTENANCE The painted and stainless steel Code Blue models require periodic care to sustain their aesthetic appearance. Units located outdoors are vulnerable to harsh environmental conditions, including UV rays, acid rain, diesel fumes and airborn iron particles (i.e., dust) which over time may cause unit discoloring.
  • Page 24: Locating Unit Serial Numbers

    CB 6 Series Administrator Guide 16 Locating Unit Serial Numbers Remove the IP or Analog Phone with the special security bit. The serial number will be listed on the manufacturer’s label located on the backside of the unit behind the phone opening.
  • Page 25: Warranty

    Administrator Guide 17 Warranty Code Blue Corporation provides a limited warranty on this product. Refer to your sales agreement to establish the terms. In addition, Code Blue’s standard warranty language, as well as information regarding support for this product while under warranty, is available at www.codeblue.com/support.
  • Page 26: Download Information

    Administrator Guide Download Information 18 Download Information Main Location: www.codeblue.com/resources Code Blue now has a centralized location where you can find Installation, Setup, Information, Configuration and Operation instructions. 1. Centry™ Administrator Guide: www.codeblue.com/resources/guides 2. CB 1 Series Administrator Guide: www.codeblue.com/resources/guides 3.

This manual is also suitable for:

Cb 6-sCb 6-f

Table of Contents