Introduction; Cellular Network Setting Checkpoints; Hardware Setup; To Verify Sim Card Working Status - Intrepid Control Systems NeoVI PLASMA Network Setting Manual

1.

Introduction:

NeoVI PLASMA and neoVI ION are part of Intrepid's advanced wireless in-vehicle data
acquisition system. neoVI PLASMA/neoVI ION connects to the vehicle bus or analog
sensors and collects data in real-time. It transmits data to the server wirelessly via 3G, WIFI,
or GPRS.
For in vehicle testing, Need to use cellular 3G data to connect device with sever. You can use
any operator SIM with 3G data enabled. Normally device is taking all setting automatically.
The neoVI Plasma/ ION Cellular network setting is same as android based mobile setting.
This document is useful to check cellular SIM card setting if device is not able to enable 3G
data automatically.
2.

Cellular network setting checkpoints.

2.1 Hardware Setup:

neoVI Plasma / neoVI ION, SIM Card for required network.

2.2 To verify SIM card working status:

Insert SIM card in any android based mobile and check signal strength and 3G data.
© Copyright 1997-2014 Intrepid Control Systems, Inc
AN-ICSI-1009
Page 3