Autodrying 1 Kg Of Mixed Fabrics; Load The Laundry; Add The Washing Powder And Additive; Select The Required Programme - Tricity Bendix CWD 1010 Operating And Installation Instructions

Tricity bendix washer-dryer operating & installation instructions wdr 1020, cwd 1010
Hide thumbs Also See for CWD 1010:
Table of Contents

Advertisement

AUTODRYING 1 KG OF MIXED FABRICS

You intend to wash and dry automatically 1 kg (2.2 lb)
of mixed fabrics which do not need ironing.
Proceed as follows:

1. Load the laundry.

2. Add the washing powder and additive.

3. Select the programme
Turn the programme selector dial clockwise to
programme 8.

4. Select the required time

Following indications given in the programme chart on
page 16, turn the time selector dial clockwise to the 60
mins setting.

5. Start the machine

Depress the ON/OFF button: the mains-on light comes
on and the machine starts operating.

6. At the end of the programme

The machine stops automatically and the drying light
goes out.
The door is controlled by a safety device which releases
2 minutes after the end of the programme.
Switch the machine off by depressing the ON/OFF
button again, the mains-on light goes out.
If the laundry is still too damp, select a further brief
drying time, bearing in mind that during the last 8
minutes the appliance carries out a cooling and
anticrease phase.
When the programme has finished you are advised to
unplug the appliance and turn off the water taps.
8
M0020S
60
M0021S
MAINS ON
T0009
14
M0017
M0019
MAINS
ON
T0009S

Hide quick links:

Advertisement

Table of Contents
loading
Need help?

Need help?

Do you have a question about the CWD 1010 and is the answer not in the manual?

This manual is also suitable for:

Wdr 1020

Table of Contents