Select The Required Programme; Start The Machine; At The End Of The Programme - Tricity Bendix CWD 1010 Operating And Installation Instructions

5. Select the required programme

Turn the programme selector dial clockwise to
programme 8.

6. Start the machine

Before starting up the machine check that:
the appliance is plugged in
the water supply taps are turned on
the drain hose is correctly and securely positioned
the door and the detergent dispenser drawer are
closed.
Depress the ON/OFF button: the mains-on light will
illuminate and the machine starts operating.

7. At the end of the programme

The machine stops automatically.
If you have depressed the rinse hold button, the
machine will stop with the water left in the tub, to
prevent the fabric from creasing. To drain the water
release the same button (the clothes will be gently spun)
or select programme 15.
The door is controlled by a safety device which releases
2 minutes after the end of the programme.
Switch the machine off by depressing the ON/OFF
button again. The mains-on light will go out.
When the programme has finished you are advised to
unplug the appliance and turn off the water taps.
8
M0020S
MAINS ON
T0009
11
M0017
MAINS
ON
T0009S