Filling The Water Tank - Kompernass DB 1400 B2 Operating Instructions Manual

Filling the water tank

1) Put the iron down on the sole of the iron
2) Open the cover of the filler opening for the water tank
3) Using the measuring beaker, fill the water tank with water to the "Max" marking,
but no further.
4) Close the cover of the filler opening for the water tank
NOTE
If the mains water in your area is rated as hard, it is recommended that you
mix the mains water with some distilled water. Otherwise, the jets for the
steam blast function could calcify (become blocked) prematurely.
To extend the optimal steam blast function, mix mains water with distilled
water according to the table.
Information about the level of hardness of water in your area can be
obtained from your local waterworks.
│ GB │ IE
■ 8
Water hardness
very soft/soft
medium
hard
very hard
.
.
.
Ratio of distilled
water to mains
water
0
1:1
2:1
3:1
DB 1400 B2