Advertisement
4.
Now that you have the SAMD Boards package installed you should see the newly
installed boards in the Arduino IDE boards menu.
To check the boards are correctly installed go to your Arduino IDE and navigate to
Tools > Board > Boards Manager
If you don't see the boards like in the below screenshot you may need to restart your
Arduino IDE.
Select the board that says 'Arduino/Genuino Zero (Native USB Port)'
5.
You are now ready to program the Exen Proto!
Connect your Exen Proto via a USB cable to your computer and allow it time to
install any needed USB drivers (This should be automatic).
You can find a blink sketch made for the Exen Proto here:
nerdonic.com/pages/products/exen/proto/downloads/demo_blink.zip
Or use / create your own sketch.
nerdonic.com
05
Advertisement
