Advertisement
Quick Links
Advertisement
Related Manuals for Alphasonik AS26
Summary of Contents for Alphasonik AS26
- Page 1 AS26 / AS29 / AS68 AS265P / AS268P / AS2629P FULL RANGE SPEAKERS...
- Page 2 Today, the new Alphasonik is committed to pushing the envelope with regards to technology, quality and value. Our electronics feature audiophile parts and circuit topology designed to let the full musical experience come through, loud and clear.
- Page 3 I N T R O D U C T I O N ....... . . 3 F E A T U R E S A N D S P E C I F I C A T I O N S .
- Page 4 With proper care and installation, your new product will provide you with many years of high performance listening enjoyment. We recommend having an Authorized Alphasonik Dealer install your new product for optimal performance and to take advantage of our warranty program. Before installing your new product, please read through the manual to fully understand the application.
- Page 5 AS26 / AS265P AS29 6.5” SPEAKER 6 x 9” SPEAKER Full Range Speaker System Full Range Speaker System Power Handling: 35 Watts RMS Power Handling: 50 Watts RMS Max Power: 350 Watts Max Power: 500 Watts Frequency Response: 30Hz – 22kHz Frequency Response: 28Hz –...
- Page 6 Avoid areas that do not provide a flat, sturdy mounting surface. Alphasonik speakers are designed to fit in almost any factory location. Again, if at all possible, it is recommended that you use a factory location. This applies mostly to later model vehicles. For those earlier models that do not have factory locations or are limited to front locations, it is recommended that you choose an area with sufficient air space.
- Page 7 NOTE: Alphasonik strongly recommends that you operate your system at low volume prior to the completed installation of your Alphasonik speakers. This will allow a test of the speaker before securing it to its permanent location. CAUTION: Make sure that all speaker wiring is fully protected from cuts, tears and possible wear.
- Page 8 2. Make sure that your audio system is off while installing and connecting your new Alphasonik speakers. Failure to do so could result in damaging the speaker beyond repair. Be sure to route the wires to the speakers with the insulated terminals ending at the speakers.
- Page 9 Once you have tested your system and have confirmed that it is operating properly, turn off your system and prepare for the final mounting of the speakers. 1. Position the speaker into the mounting hole and reconfirm the correct mounting location and hole placement. Screw clips are provided to insure a snug fit.
- Page 11 If your Alphasonik speakers have been installed professionally by an Authorized Alphasonik Dealer, we recommend that you return to the Dealer and demonstrate the problem to a qualified installer or repair technician. If you installed the speakers yourself, use the following guidelines to help find the problem: 1.
- Page 12 IMPORTANT: Never cut any metal that is an integral part of the vehicle’s safety or structural support system. If you are unsure, it is best to have the product professionally installed by an Authorized Alphasonik Dealer. Never sacrifice your safety for sound.
- Page 13 4. This warranty does not cover car static, electrical interference, adjustments or labor costs for the removal or reinstallation of the unit for repair. 5. The sole responsibility of Alphasonik under this warranty shall be limited to the repair or replacement thereof, at the sole discretion of Alphasonik.
- Page 14 YOU MAY ALSO HAVE OTHER RIGHTS THAT VARY FROM STATE TO STATE. 10. Should you have any difficulties with the performance of this product during warranty or with any Alphasonik authorized service center, you may contact Alphasonik by emailing us at support@alphasonik.com.