Alphasonik VIVID Manual

SETTING THE PACE SINCE 1976

ALPHASONIK WAS FOUNDED IN 1976 WITH ONE MISSION, TO BRING STATE OF THE ART PERFORMANCE TO THE AUDIO ENTHUSIAST.
In these early years we pioneered such ground-breaking technologies which remain a benchmark in high-end audio.
Today, the new Alphasonik is committed to pushing the envelope with regards to technology, quality and value. Our electronics feature audiophile parts and circuit topology designed to let the full musical experience come through, loud and clear. Our loudspeakers employ the latest high technology materials and processes such as carbon reinforced woven glass and titanium vapor deposition to deliver your music with tremendous impact, dynamics and resolution.
We stand behind our quality with one of the best warranties in consumer electronics. Compare Alphasonik products against anything the competition has to offer. We're confident you will come to one conclusion...
ALPHASONIK HAS NO EQUAL.

INTRODUCTION

Alphasonik products are specifically engineered and designed for the audio environment. This manual contains important information about installation and set-up procedures. With proper care and installation, your new product will provide you with many years of high performance listening enjoyment.

SPECIFICATIONS

Power Output: 5Watts x 2
Frequency response: 90Hz ~1 8kHz
Impedance: 4-ohms
Sensitivity: 80dB±2dB
S/N Ratio: ≥ 65dB
Distortion: ≤ 0.5%
Power supply: Built-in battery or micro USB 5V
Size: 9.05" x 2.87" x 3.89" (230 x 73 x 99mm)
Battery operating time: 5 - 6 hours
Weight: 1.18lbs (539g)

FUNCTIONS

Features:

1. Bluetooth Function: Bluetooth V2.1+EDR
2. Built-in Microphone, for hands free support
3. Aux in, compatible with all 3.5mm Audio Device
4. Built-in 2000mah Li-battery
5. Micro USB input for charging

Package Content:

1. Portable Speaker x 1
2. Micro USB Charging Cable x 1
3. 3.5mm Audio Cable x 1
4. Instructions Manual x 1

Button Identification:

5. "-": -PREV / Vol
6. "+": +NEXT / Vol+
7. "O": Pause / Play / Disconnect Device

Charging:
Use the USB port to charge the device, when the unit is charging the LED indicator next to the charging port will illuminate red. Once charge is complete the LED indicator will turn off.
When the battery level is low an audible alarm will notify you to recharge the speaker. Connect the device to the charging port to charge the speaker. You can use the speaker while connected to the charging port and the charger will continue to recharge

Bluetooth Mode:

1. Press and hold down the "O" button to turn the speaker ON/OFF. When in Bluetooth mode, the LED indicator will illuminate Blue and the LED will blink.
2. Search your compatible device in bluetooth settings for "VIVID" and select it to connect to the speaker. The blinking light will stay illuminated when pairing is successful.
3. Momentarily Press the "O" to pause or play media. Pressing and holding the "O" button down will disconnect the bluetooth speaker.
4. Selecting the "+" / "-". buttons momentarily will increase and decrease the volume. Pressing and holding the "+" / "-" button will change the media track.

Handfree Function:

5. While in Bluetooth mode, when receiving a phone call, you can momentarily press the "O" button on the speaker to answer the incoming call and press again to end the call.

AUX Mode:
When using AUX mode insert a 3.5mm cable, the LED on the speaker will illuminate Red to confirm the device is now in AUX mode.