Advertisement
In the event that your Alphasonik speakers appear to require
service, we ask that you first do a little troubleshooting to determine if
the problem is actually the speaker or a problem located in a different
part of the vehicle such as the amplifier, wiring, fusing or possibly the
source unit.
If your Alphasonik speakers have been installed professionally by
an Authorized Alphasonik Dealer, we recommend that you return to the
Dealer and demonstrate the problem to a qualified installer or repair
technician. If you installed the speakers yourself, use the following
guidelines to help find the problem:
1. No Sound
•
Check the source unit or amplifier for power and be sure they are
operating properly.
•
Check all signal connections.
•
Check for any wiring that may be shorting together or touching the
metal chassis.
•
Check all ground connections.
2. Distorted Sound At All Volumes
•
Check for bad speaker connections.
•
Check wiring for correct polarity.
3. Distorted Sound At High Volumes Only
•
Check for loose mounting of the speaker.
•
Inspect the speaker for debris in the cone or other obstructions.
4. Poor Bass Response
•
Check wiring for correct polarity.
•
Check for unstable or loose mounting surface.
•
Check Bass and Treble controls at the source unit or amplifiers.
5. Poor High Frequency Response
•
Check wiring for correct polarity.
•
Check Treble controls or EQ settings.
•
Check the Tweeter for possible damage.
10
Advertisement
