1. Manuals
  2. Brands
  3. ProGear Manuals
  4. Treadmill
  5. Walk To Fit
  6. Owner's manual

ProGear Walk To Fit Owner's Manual

Hide thumbs
Table of Contents

Advertisement

Quick Links

Download this manual
3060.4-072216

Advertisement

Table of Contents
loading
Need help?

Need help?

Do you have a question about the Walk To Fit and is the answer not in the manual?

Questions and answers

Subscribe to Our Youtube Channel

Related Manuals for ProGear Walk To Fit

Summary of Contents for ProGear Walk To Fit

  • Page 1 3060.4-072216...

  • Page 3: Table Of Contents

    TABLE OF CONTENTS SERVICE ------------------------------------------------------------------------- 2 LABEL PLACEMENT---------------------------------------------------------- 3 IMPORTANT SAFETY INSTRUCTION----------------------------------- 4 OVERVIEW DRAWING ------------------------------------------------------ 8 PART LIST ----------------------------------------------------------------------- 9 TOOLS ---------------------------------------------------------------------------11 ASSEMBLY ---------------------------------------------------------------------- 12 COMPUTER --------------------------------------------------------------------- 15 STORAGE ----------------------------------------------------------------------- 17 ADJUSTMENTS ---------------------------------------------------------------- 18 LUBRICATION ------------------------------------------------------------------ 20 MAINTENANCE & TROUBLE SHOOTING ----------------------------- 21 WARRANTY -------------------------------------------------------------------- 24 PARTS REQUEST FORM --------------------------------------------------- 25...

  • Page 4: Service

    SERVICE IMPORTANT: FOR NORTH AMERICA ONLY For damaged or defective products, questions, replacement parts or any other needed service support, please contact our customer service department (8:00 AM - 5:00 PM Pacific Standard Time, Daily) by below methods: For Best Service Email: Service@paradigmhw.com Website: www.paradigmhw.com...

  • Page 5: Label Placement

    LABEL PLACEMENT...

  • Page 6: Important Safety Instruction

    IMPORTANT SAFETY INSTRUCTION IMPORTANT SAFETY INSTRUCTION Basic precautions should always be followed, including the following safety instructions when using this treadmill: Read all instructions before using this treadmill. DANGER: To reduce the risk of electric shock, please read the following: ...
  • Page 7 IMPORTANT SAFETY INSTRUCTION  Do not operate where aerosol (spray) products are being used or where oxygen is being administered.  Keep Dry - do not operate in a wet or moist condition. Save these instructions.  Do not operate the treadmill near a blanket. Excessive heating can occur and cause fire, electrical shock, or injury to user.
  • Page 8 IMPORTANT SAFETY INSTRUCTION WARNING: Connect the treadmill to a properly grounded outlet only. See grounding instructions. SAVE THESE INSTRUCTIONS GROUNDING INSTRUCTIONS  This product must be grounded. If it should malfunction or break down, grounding provides a path of least resistance for electric current reducing the risk of electric shock.
  • Page 9 IMPORTANT SAFETY INSTRUCTION  This unit must be plugged into a nominal 120 volt, which has a grounding.  Keep hands clear of all moving parts. Never place hands, feet under the treadmill.  Do not use the treadmill on a carpet that is greater than 1/2 inch in height. ...

  • Page 10: Overview Drawing

    OVERVIEW DRAWING...

  • Page 11: Part List

    PART LIST Part # Description Qty Part # Description Main Frame 1 025 Bolt (M8x40mm) Rear Roller Adjustment Bolt 2 026 Safety Tube B Square End Cap (□25.4) (M8x70mm) 003R Rear Right End Cap 1 027 Bolt (M8x60mm) 003L Rear Left End Cap 1 028 Adjustable Leveler (M10xØ...
  • Page 12 PART LIST Part # Description Qty Part # Description 050L Left Side Rail 1 070 Computer Deck Bumper (48x32x5) 6 071 Safety Tether Key (SD-7934-1) Bolt (M8x45mm) 1 072 Sensor Bracket Motor Bracket 1 073 Spring Washer (M8) Bolt (M8x12mm) 2 074 Washer (M10) Rear Roller (Ø...

  • Page 13: Tools

    TOOLS Ring Spanner 1 pcs Screw Head Allen Wrench 5mm 1pcs S6 Allen Wrench 1PCS...

  • Page 14: Assembly

    ASSEMBLY Step 1 Place the treadmill in the upright position and then place one hand on the rear end of Main Frame (1) and use your other hand to pull out the Spring Knob (23). Lower the Main Frame (1) down from the rear of treadmill until the Spring Knob (23) "pops"...
  • Page 15 ASSEMBLY Step 2 Pull the Short Knob (61) and then lift the Handlebar (68) all the way up. Tighten the Handlebar (68) to the Stabilizer (57) with two Handlebar Knobs (33) and two M10 Washers (74). Step 3 Attach the Console Bracket (88) onto the Handlebar (68) and tighten with two Square Neck Screws (69), Spring Washers (73) and Nut Caps (78) by Ring Spanner provided.
  • Page 16 ASSEMBLY Step 4 There are five Adjustable Levelers (28) on the bottom of both Stabilizer Tubes (31) and Stabilizer (57). Turn the Adjustable Leveler (28) as needed to level the treadmill.

  • Page 17: Computer

    COMPUTER Quick Start: Flip the Master Power Switch that is located at the front of the treadmill to the ON position. The treadmill will self-test for 2 seconds on startup and then the speed setting will show up after a 2 second long beep. Before beginning a workout session ensure that the Safety Tether Key is properly placed onto the Computer Console and the Safety Clip is securely attached to an article of your clothing.
  • Page 18 COMPUTER Computer Functions: TIME: Displays your elapsed workout time in minutes and seconds. Press the START button to start exercise. To set TIME press the MODE button ONCE until you see the TIME begin blinking. Press the FAST or SLOW button to change the time, each time you press the FAST button TIME should increase 1 minute and SLOW button TIME should decrease 1 minute.

  • Page 19: Storage

    STORAGE Handlebar Knob Spring Knob Handlebar Short Knob FOLDING THE TREADMILL For your convenience, the treadmill can be folded up and placed in a storage area. To fold the treadmill place one hand on the rear end of main frame and use your other hand to pull out the Spring Knob, then lift the main frame up until the Spring Knob "pops"...

  • Page 20: Adjustments

    ADJUSTMENTS Belt Adjustment: The belt is adjusted at the factory; it may come loose during transportation and/or from use. After prolong use of the treadmill, the belt will stretch out. If the belt is shifting to the left, turn on the main power switch of treadmill and let the belt run at the speed of 1-1.5 MPH.
  • Page 21 ADJUSTMENTS Incline Adjustment: Place one hand on the rear end of main frame. Lift the main frame up then adjust the Incline Adjuster to the desired position. 2 Incline Degree Options: 3 % Incline degree when Incline Adjuster at Position A. 6 % Incline degree when Incline Adjuster at Position B.

  • Page 22: Lubrication

    LUBRICATION The treadmill has already been coated with "Silicone Oil" in advance. Silicone oil is a non-volatile oil and by the time you receive should have permeated through the belt. There will be no need to re-apply the oil under normal circumstances. To maintain the belt, "Silicone Oil"...

  • Page 23: Maintenance & Trouble Shooting

    MAINTENANCE & TROUBLE SHOOTING WARNING: To prevent electrical shock, please turn off and unplug(ed) the treadmill before cleaning or performing routine maintenance. CLEANING The treadmill can be cleaned with a soft cloth and mild detergent. Do not use abrasives or solvents. Be careful not get excessive moisture on the display panel as this might cause an electrical hazard or electronics to fail.
  • Page 24 MAINTENANCE & TROUBLE SHOOTING Problem Potential Causes Corrections Er 1 (Computer did Bad communication for Check the cables are in good not receive any upper and lower connection. signal for 30 controller. seconds.) The communicate signal Turn off the Master Power from upper or lower Switch to the OFF position, controller is bad by...
  • Page 25 MAINTENANCE & TROUBLE SHOOTING Problem Potential Causes Corrections Er 5 (Excessive Check your machine to make Turn off the Master Power Switch drive motor sure the running belt is to the OFF position, wait 30 without any abnormal current.) seconds, then turn on the Master interference.

  • Page 26: Warranty

    WARRANTY MANUFACTURER’S LIMITED WARRANTY Paradigm Health & Wellness warrants to the original purchaser that this product is free from defects in material and workmanship when used for the purpose intended, under the conditions that it has been installed and operated in accordance with Paradigm’s Owner’s Manual.

  • Page 27: Parts Request Form

    PARTS REQUEST FORM Paradigm Health & Wellness, Inc. EMAIL THIS FORM WITH YOUR RECIEPT OF PURCHASE TO Service@paradigmhw.com * NAME: _______________________________________________________ ADDRESS: ____________________________________________________ CITY ______________ STATE ______________ ZIP ___________________ TELEPHONE: (Day) _____________________________________________ (Night) ____________________________________________ SERIAL#: ______________________________________________________ MODEL#: _____________________________________________________ PURCHASE DATE: _____________________________________________ PLACE OF PURCHASE: _________________________________________ PART # DESCRIPTION...

Table of Contents