Advertisement
Subsection XX (COMMUNICATION TOOLS AND B.U.D.S.)
NOTE: When selecting the update menu in
B.U.D.S., a dialog box will appear and the update
file description may give some clue to finding the
vehicle-related information in BOSSWeb.
mbg2008-022-100_a
TYPICAL
1. File description
Writing Changes in an ECU
1. When finished, save changes to the related
electronic module by clicking the Write Data
button.
vmr2006-012-100_ben
NOTE: A message box may confirm a successful
operation.
If the word Modified appears in the vehicle file
identification number at the top of the B.U.D.S.
page, then a change has been made that requires
selecting the Write Data to save the change.
rmr2010-020-008_a
TYPICAL
1. Indicate setting or data modified; Write Data to save
6
2. Remove tether cord from the engine cut-off
switch.
Disconnect MPI connections and secure the vehi-
cle diagnostic connector in its holder.
smr2014-026-001_a
TYPICAL
1. Diagnostic connector secured to holder
NOTICE
Failure to secure the diagnostic con-
nector in its protective cap may result in cor-
rosion or other damage to the terminals. Ve-
hicle operation may be affected under certain
circumstances.
3. Reinstall all removed parts, refer to appropriate
subsections.
smr2014-026
Advertisement
