NEC P506QL User Manual page 6

Installing the Projector
This projector is designed to be used with a 100 240 V AC, 50/60 Hz power supply.
Before using the projector, check that the power supply to which the projector is to
be connected meets these requirements.
Use
directly to electrical light wiring. Doing so is dangerous.
Do not use in places such as those described below. Doing so could lead to fire or
electric shock.
Shaky tables, inclined surfaces or other unstable places
-
Near heating appliances or places with heavy vibrations
-
Outdoors or humid or dusty places
-
Places exposed to soot or steam
-
Near cooking appliances, humidifiers, etc.
-
Do not use in places such as those described below where the projector could get
wet. Doing so could lead to fire or electric shock.
Do not use in the rain or snow, on a seashore or waterfront, etc.
-
Do not use in a bathroom or shower room.
-
Do not place vases or potted plants on the projector.
-
Do not place cups, cosmetics or medicines on the projector.
-
Should water, etc. get inside the projector, first turn off the
unplug the power cord from the power outlet and contact your dealer
Do not insert or drop metal or combustible objects or other foreign materials into
the projector from the vents. Doing so could lead to fire or electric shock. Be par-
ticularly careful if there are children in the home. Should a foreign object get inside
the projector, first turn off the projector's power, then unplug the power cord from
the power outlet and contact your dealer.
Unplug the power cord if the projector malfunctions.
Should the projector emit smoke or strange odors or sounds, or if the projector has
been dropped or the cabinet broken, turn off the projector's power, then unplug
the power cord from the power outlet. Failure to do so could not only lead to
or electric shock, visual impairment or burn.
ment. Contact your dealer for repairs.
Never try to repair the projector on your own. Doing so is dangerous.
Do not disassemble the projector.
Do not remove or open the projector's cabinet.
Also, do not modify the projector. There are high voltage areas in the projector.
Modifying the projector could lead to fire, electric shock, or could lead to visual
impairment or burn by cause leakage of laser beams.
Have qualified service personnel perform inspection, adjustments and repairs of
the interior.
it could also result in vision impair-
– v –
Important Information
power, then
fire