ADJUSTING THE FRONT
BRAKE
The front brake is of the disc type with
mechanical control for which requires
periodic adjustment interventions.
The clearance on the front brake lever
should be 5 to 6 mm.
The adjustment must be performed as
follows:
-In the driving position to verify the
clearance
-if the stroke was superior turn register
A on the brake lever
Attention: After each adjustment,
tighten the locknut.
For the adjustment of the tension of
the brake cable to act on the bolt B so
that operating the lever on the
handlebar braking is immediate, and
that the wheel rotates freely when the
lever is not operated.
36