Copeland Exeter Instructions

Two-leaf extension table

Hide thumbs

Unpack the table

onto a soft level

surface and identify

Exeter two-leaf extension tables:

Tools required

Step 1:

Remove the shipping blocks

Lay the table top sub-assembly face

down on a soft level surface. Use a

Philips head screw driver to remove

blocks under the table top assembly by

detaching all the flat head screws from

the

shipping

blocks

Remove

any

packing

underneath the table.

Flat head screws

Shipping

block

Instructions for Exeter Two-leaf

Extension Table

Hardware included:

¼" - 20 x 50mm hex bolts (4)

4mm Allen wrench (1)

the listed items.

42" W x 72/96/112" L x 30" H

Philips head screw driver

(Figure

1).

material

Table top

assembly

Figure 1.

Flat head screws

Shipping

block

Remove the

shipping blocks

Remove the shipping blocks from

the table top sub-assembly

Components included:

Table top assembly with leaf (1)

Leg base assembly (1)

Table of Contents

Need help?

Do you have a question about the Exeter and is the answer not in the manual?

Questions and answers

Summary of Contents for Copeland Exeter

Page 1 Instructions for Exeter Two-leaf Extension Table Unpack the table Hardware included: Components included: onto a soft level ¼” - 20 x 50mm hex bolts (4) Table top assembly with leaf (1) surface and identify 4mm Allen wrench (1) Leg base assembly (1) the listed items.
Page 2 Tools required Allen wrench Step 2: Install the table leg sub-assembly ¼” – 20 x 50mm hex bolt Install the leg base to the table top assembly by Cutout aligning and inserting each tenon on the leg base into the cutout on the table top assembly. Then slide a ¼” – 20 x 50mm hex bolt into each hole and tighten with the provided Allen wrench to secure the leg base assembly to the table top assembly (Figure 2).
Page 3 How to use the Slide Lock to lock and unlock the table top in use To lock the top, push down the small black handle in the middle of the slide arm. To unlock the top, simply push the handle up on both sides. Lock-up Figure 3.
Page 4 Care Instructions To care for and preserve the finish on your new Copeland Furniture piece, please keep the following recommendations in mind. While our furniture has been finished with a durable top coat, the surface may be sensitive to dents and abrasions during the first 30 days in your home.
Page 5 How to Operate Extension Table Lock Mechanism Tools required None Locking locations One leaf extension tables usually have two locking locations (Figure 1). The inner position is for locking the table when the leaf is unfolded (Figure 1-2). The outer position is for locking the table when the leaf is folded (Figure 1-1).

Copeland Exeter Instructions

Table of Contents

Need help?

Questions and answers

Related Manuals for Copeland Exeter

Summary of Contents for Copeland Exeter

Table of Contents