Page 1
Base Assembly x2 Your Astrid bed is delivered in either two or three boxes depending on whether you have ordered a bed with headboard or platform bed. Unpack the bed parts onto a soft, level surface in a space near where the bed is to be used.
Page 2
Certain parts may require some minor flexing to begin the bolts. This is normal and to be expected. If you have purchased an Astrid platform bed with no headboard, assembly is complete. If your bed includes a headboard then proceed to step five.
Page 3
Astrid Bed - assembly instructions Step 5 Headboard Assembly - Solid or Split Headboards Brace Brace with Mark – toward center of bed Note on Split Headboard Version: To preserve visual continuity of the wood grain, the panels of the Split Headboard version have been cut from a single larger •...
Page 4
Astrid Bed - assembly instructions Step 7 - optional • Your Astrid headboard may be positioned in two heights depending on the thickness of the mattress used. The bed comes packaged with the headboard in the lower position. • To Adjust the height, use the Allen wrench to unscrew all the bolts at the back of each headboard panel.
Page 5
Important: Please Note: Beds must be disassembled before moving to avoid damage. Never attempt to move the bed while it is assembled. To care for and preserve the finish on your new Copeland Furniture piece, please keep the following recommendations in mind.
Need help?
Do you have a question about the Astrid and is the answer not in the manual?
Questions and answers