Installation; Smart Connect; The Sd Card Explained; Adding The Sensor To The Controller - Toro Evolution Series Manual

Installation

®
EVOLUTION Smart Connect®
1
3
5
4
SD Card Explained
The supplied SD card contains forty years of weather data
2
for all latitudes, longitudes, and zip codes in North America.
When the weather sensor's location is entered in the controller
(page 6), historical weather data is loaded into the controller.
In the event your controller loses connectivity to the weather
sensor, the controller will use the the historical weather data to
determine the irrigation run time until connectivity is restored.

Adding the Sensor to the Controller

4
®
For the EVOLUTION
the weather sensor, the sensor (with its unique ID) must be
"added" to the controller.
(For assistance with menu navigation, please see the "Menu
Navigation" section on page 9.)
ADVANCED then
1. Press
to ADD/REMOVE DEVICE.
2.
ZONE DETAILS
SCHEDULE STARTS
SCHEDULE DETAILS
SENSORS
ADD/REMOVE DEVICE
controller to communicate with
.
to confirm.
ADVANCED