Table of Contents
Advertisement
4. Turn the filter 180 degrees in anti-clockwise
direction to open it, without removing. Let the
water flow out.
5. When the bowl is full of water, turn the filter
back and empty the container.
6. Repeat the steps 4 and 5 until the water stops
to flow out.
7. Turn the filter anti-clockwise to remove it.
1
8. If it is necessary, remove fluff and objects from
the filter recess.
9. Make sure that the impeller of the pump can
rotate. If it does not rotate, contact the
Authorised Service Centre.
32
2
10. Clean the filter under the water tap.
11. Put the filter back into the special guides by
turning it clockwise. Make sure that you tighten
the filter correctly to prevent leakages.
2
1
12. Close the pump cover.
1
2
Advertisement
Table of Contents
