Installation - Zanussi ZWD11683NS User Manual

Table of Contents

Advertisement

The floor area on which the appliance is to be
installed must be flat, stable, heat resistant and
clean.
Keep the transit bolts in a safe place. If the
appliance is to be moved in the future they must
be reattached to lock the drum to prevent an
internal damage.
Always take care when moving the appliance as
it is heavy. Always use safety gloves and
enclosed footwear.
Do not install or use a damaged appliance.
Do not install the appliance where the appliance
door cannot be fully opened.
Adjust the feet to have the necessary space
between the appliance and the flooring.
When the appliance is in its permanent position,
check if it is levelled correctly with the aid of a
spirit level. If it is not, adjust the feet accordingly.
ELECTRICAL CONNECTION
WARNING! Risk of fire and electric
shock.
The appliance must be earthed.
Always use a correctly installed shockproof
socket.
Do not use multi-plug adapters and extension
cables.
Do not pull the mains cable to disconnect the
appliance. Always pull the mains plug.
Do not touch the mains cable or the mains plug
with wet hands.
WATER CONNECTION
Do not cause damage to the water hoses.
Before connection to new pipes, pipes not used
for a long time, where repair work has been
carried out or new devices fitted (water meters,
etc.), let the water flow until it is clean and clear.
Ensure that there are no visible water leaks
during and after the first use of the appliance.
USE
WARNING! Risk of injury, electric
shock, fire, burns or damage to the
appliance.

INSTALLATION

WARNING! Refer to Safety chapters.
Do not put flammable products or items that are
wet with flammable products in, near or on the
appliance.
Do not touch the glass door while a programme
operates. The glass can get hot.
Do not dry damaged (torn, frayed) items that
contain padding or fillings.
If laundry has been washed with a stain
remover, carry out an additional rinse cycle
before starting a drying cycle.
Make sure that all metal objects are removed
from the laundry.
Dry only fabrics that are suitable to dry in the
appliance. Follow the cleaning instruction on the
item label.
Do not sit or stand on the open door of the
appliance.
Do not dry dripping wet clothes in the
appliance.
Do not let hot items to touch the plastic parts of
the appliance.
Remove a detergent ball (if used) before starting
a drying programme.
Do not use a detergent ball if setting a non-stop
programme.
SERVICE
To repair the appliance contact the Authorised
Service Centre.
Use original spare parts only.
DISPOSAL
Disconnect the appliance from the mains
electrical and water supplies.
Cut off the mains electrical cable close to the
appliance and dispose of it.
Remove the door catch to prevent children or
pets from becoming trapped in the drum.
Dispose of the appliance in accordance with
local requirements for the disposal of Waste
Electrical and Electronic Equipment (WEEE).
UNPACKING
1. Remove the external film. If necessary, use a
cutter.
5

Advertisement

Table of Contents
loading

Table of Contents