Download Print this page

Siemens 3TL60 Operating Instructions Manual

Replacing of magnet coils and resistor 3ty5656
Hide thumbs Also See for 3TL60:

Advertisement

Quick Links

Advertisement

loading

Summary of Contents for Siemens 3TL60

  • Page 2 Hinweis: Note: "OFF" The vacuum contactor must switched to the Das Auswechseln von Magnetspule u nd Widerstand er­ position to permit replacement of the magnet coils and folgt in Schaltstellung US" des Vakuumschutzes. the economy resistor. Follow replacement in­ Die Angaben z um Auswechsetn sorgfaltig beachten. da structions carefully because they are decisive for proper hiervon die einwandfreie Funktion des Vakuumschutzes functioning of the vacuum contactor .
  • Page 3 operation: ,bei Gleichstrom: at relay contacto r 11 .2, contact 11 am Hilfsschiitz 11.2 Kontakt 18 @ at terminal strip, terminal A2 @ an der Klemenleiste Klemme at relay contactor 11.2, contact 18 am Hilfsschiitz11.2 Kontakt 18 ® ® at relay contactor 11.2, contact 48 am Hilfsschiitz11.2 Kon1akt 48 (see Fig.
  • Page 5 - Spulenpaar 8.1 und Magnetkerne 8.2 aus dem (all) cores 8.2 from the vacuum contactor at the , Vakuumschutz auf der, der Klemmenleiste gegen­ opposite the terminal strip uberliegenden Seite herausnehmen SIEMENS 3TY5651- ¢ Uc = . . . Us= ..Fig.
  • Page 6 - Reconnect the leads to the new pair of magnet coils - Zuleitungen des Spulenpaares 8.1 (neu) und des 8 .1 to the new economy resistor 11.1 as follows Sparwiderstandes 11 .1 (neu) entsprechend Fig.1 0 and as shown in Fig.1 0 for AC operation and Fig.11 for fUr Wechselst rombetatigung bzw.
  • Page 7 operation: bei Gleichstrom: Q) at relay contactor 11.2 11 .2 contac t am Hilfsschutz Kontakt @ at the terminal strip, termi nal @ an der Klemmenleiste Klemme lead 1 1 5 (580 mm long ) a Leitung 11 .5 mit 580 11.2 Lange am t relay conta ctor 11...

This manual is also suitable for:

3tl61