Echo PAS-225 Pro Attachment Series Manual
  1. Manuals
  2. Brands
  3. Echo Manuals
  4. Trimmer
  5. PAS-225 Pro Attachment Series
  6. Manual

Echo PAS-225 Pro Attachment Series Manual

Value pack
Hide thumbs
Table of Contents

Advertisement

Quick Links

Download this manual
Value Pack
Pro Attachment
The engine exhaust from this product contains chemicals
known to the State of California to cause cancer, birth defects,
or other reproductive harm.
Read and understand all provided literature before
use. Failure to do so could result in serious injury.
Note:This product complies with CAN ICES-2/NMB-2.
X7732274303
© 01/2020 ECHO Incorporated
PAS-225
Series™

Advertisement

Table of Contents
loading
Need help?

Need help?

Do you have a question about the PAS-225 Pro Attachment Series and is the answer not in the manual?

Questions and answers

Related Manuals for Echo PAS-225 Pro Attachment Series

Summary of Contents for Echo PAS-225 Pro Attachment Series

  • Page 1 State of California to cause cancer, birth defects, or other reproductive harm. Read and understand all provided literature before use. Failure to do so could result in serious injury. Note:This product complies with CAN ICES-2/NMB-2. X7732274303 © 01/2020 ECHO Incorporated...

  • Page 2: Table Of Contents

    TABLE OF CONTENTS Introduction ....................3 Servicing Information .................. 3 Parts/Serial Number ................3 Service....................4 ECHO Consumer Product Support............4 Product Registration ................4 Additional Literature................4 Safety......................5 Manual Safety Symbols and Important Information......5 International Symbols ................6 Personal Condition and Safety Equipment ..........

  • Page 3: Introduction

    Storage ..................... 46 Long Term Storage (Over 30 Days) ..........46 Storage Hook Installation ..............47 Specifications ................... 48 ECHO Optional Attachments............. 49 Product Registration ................50 INTRODUCTION Specifications, descriptions and illustrative material in this literature are as accurate as known at the time of publication, but are subject to change without notice.

  • Page 4: Service

    Register your ECHO equipment on-line at www.echo-usa.com or by filling out the product registration sheet included in this manual. Registering your product confirms warranty coverage and provides a direct link to ECHO if we find it necessary to contact you.

  • Page 5: Safety

    PAS-225 SAFETY Additional Literature In addition to finding information online, information is available from your Authorized ECHO Service Dealer, or by contacting ECHO Inc., 400 Oakwood Road, Lake Zurich, IL 60047 (1-800-432-ECHO (3246)). SAFETY Manual Safety Symbols and Important Information Throughout this manual and on the product itself, you will find safety alerts and helpful, informational messages preceded by symbols or key words.

  • Page 6: International Symbols

    DO NOT USE Beware of thrown BLADES - line head objects only Plan retreat path from Hot surface falling objects. Keep bystanders and helpers away 15 m (50 ft.). Beware thrown objects. Wear eye protection. X7732274303 © 01/2020 ECHO Incorporated...

  • Page 7: Personal Condition And Safety Equipment

    Users of this product risk injury to themselves and others if the unit is used improperly and/or safety precautions are not followed. Proper clothing and safety gear must be worn when operating unit. X7732274303 © 01/2020 ECHO Incorporated...
  • Page 8 Hearing/Ear Protection ECHO recommends wearing personal protection whenever unit is used. Breathing Protection Operators who are sensitive to dust or other common airborne allergens may need to wear a dust mask to prevent inhaling these materials while operating unit.
  • Page 9 To reduce the risk of serious or fatal injury, persons with pacemakers should consult with their physician and the pacemaker manufacturer before operating this machine. In the absence of such information, ECHO does not recommend the use of this machine by anyone who has a pacemaker.
  • Page 10 • Immediately stop using all power equipment and consult a doctor if you feel tingling, numbness, or pain in the fingers, hands, wrists, or arms. The sooner RSI/CTS is diagnosed, the more likely permanent nerve and muscle damage can be prevented. X7732274303 © 01/2020 ECHO Incorporated...
  • Page 11 Do not work in odd positions or on ladders. Do not over reach. Avoid Hot Surfaces • During operation, the drive shaft housing and attachment bearing housing may become very hot, too hot to touch. Avoid contact during and immediately after operation. X7732274303 © 01/2020 ECHO Incorporated...

  • Page 12: Equipment

    ◆ safe operating condition. 80-Tooth blade requires professional sharpening. Note: ECHO, INC. will not be responsible for the failure of cutting devices, attachments or accessories which have not been tested and approved by ECHO. Moving parts can amputate fingers or cause severe injuries.

  • Page 13: Emission Control (Exhaust & Evaporative)

    The 50 or 300 hour emission compliance period is the time span selected by the manufacturer certifying the engine emissions output meets applicable emissions regulations, provided that approved maintenance procedures are followed as listed in the Maintenance Section of this manual. X7732274303 © 01/2020 ECHO Incorporated...

  • Page 14: Description

    Locate the safety decal(s) on your unit. Make sure the decal(s) is legible and that you understand and follow the instructions on it. If a decal cannot be read, a new one can be ordered from your ECHO dealer. Safety label is for example only. Your label my appear slightly different.
  • Page 15 14. Spark Arrestor Muffler Or Spark Arrestor Muffler With Catalyst 15. Fuel Tank 16. Recoil Starter Handle 17. Fuel Tank Cap 18. Purge Bulb 19. Choke 20. Air Cleaner 21. Spark Plug 22. Drive Shaft Assembly 23. Blower Pipe X7732274303 © 01/2020 ECHO Incorporated...

  • Page 16: Contents

    Due to packaging restrictions, some assembly may be necessary. After opening the carton, check for damage. Immediately notify your retailer or ECHO Dealer of damaged or missing parts. Use the contents list to check for missing parts. Power Head with Upper Drive Shaft Assembly...

  • Page 17: Support Handle Installation

    Secure lower shaft assembly to coupler by tightening clamping knob (D). Support Handle Installation Note: Label shows minimum spacing for support handle location. If necessary, position support handle for comfortable operation and securely tighten screws. X7732274303 © 01/2020 ECHO Incorporated...

  • Page 18: Operation

    Fuel Diesel fuels and alternative fuels, such as E-15 (15% ethanol), E -85 (85% ethanol) or any fuels not meeting ECHO requirements are NOT approved for use in ECHO 2-stroke gasoline engines. Use of diesel or alternative fuels may cause...
  • Page 19 2-stroke and 2/4-stroke hybrid engines. Two Stroke Oil - A two-stroke engine oil, such as ECHO branded 2-stroke oils, meeting ISO-L-EGD (ISO/CD 13738) and J.A.S.O. FD Standards must be used. ECHO branded 2-stroke oils meet these standards. Engine problems due to inadequate lubrication caused by failure to use an ISO-L- EGD (ISO/CD 13738) and J.A.S.O.
  • Page 20 Add the proper amount of gal. fl.oz. 2-stroke oil to gasoline. Close container and shake to mix oil with gasoline. Add remaining gasoline, close fuel container, and remix. X7732274303 © 01/2020 ECHO Incorporated...

  • Page 21: Operating Blower

    Wear gloves to protect hands from sharp edges and hot surfaces. X7732274303 © 01/2020 ECHO Incorporated...
  • Page 22 Note: Never use a higher speed setting than necessary to perform a task. Remember, the higher the engine speed, the louder the blower noise. Minimize dust by using blower at lower speeds. Keep debris on your property. Be Smart - be a good neighbor. X7732274303 © 01/2020 ECHO Incorporated...

  • Page 23: Operation With Blades

    U-Handle ensures a higher safety factor. Do Not install blades on GT (Curved Shaft) model trimmers. • Use only ECHO approved parts. Failure to use the correct parts can cause the blade to fly off. Seriously injury to the operator and / or bystanders can occur.

  • Page 24: Blade Selection

    8 Tooth Weed/Grass Blade is designed for grass, garden debris and thick weeds up to 19 mm (0.75 in.) diameter. DO NOT use this blade for brush or heavy woody growth. X7732274303 © 01/2020 ECHO Incorporated...
  • Page 25 During blade operation, the same fatigue reduction is achieved. Safety to the operator is also enhanced by reducing the possibility of blade contact with the operator's hands and feet by restricting trimmer movement. X7732274303 © 01/2020 ECHO Incorporated...

  • Page 26: Starting Cold Engine

    Move choke lever (B) to COLD START ( ) position. Purge Bulb Pump purge bulb (C) until fuel is visible and flows freely in the clear fuel tank return line. Pump bulb an additional 4 or 5 times. X7732274303 © 01/2020 ECHO Incorporated...
  • Page 27 Note: If engine does not start with choke in “RUN” position after 5 pulls, repeat instructions 2 - 5. Throttle Trigger After engine warm-up, grip throttle handle and support handle. Depress the throttle trigger lockout, and gradually depress throttle trigger to increase engine RPM to operating speed. X7732274303 © 01/2020 ECHO Incorporated...

  • Page 28: Starting Warm Engine

    Move stop switch button (A) forward away from the STOP position. Purge Bulb Pump purge bulb (C) until fuel is visible in the “Clear” fuel return line. Pump bulb an additional 4 or 5 times. X7732274303 © 01/2020 ECHO Incorporated...

  • Page 29: Stopping Engine

    STOP position. If engine does not stop when stop switch is moved to STOP position, close choke - COLD START position - to stall engine. Have your ECHO dealer repair stop switch before using unit again. X7732274303 © 01/2020 ECHO Incorporated...

  • Page 30: Maintenance

    Level 1 = Easy to do. Common tools may be required. Level 2 = Moderate difficulty. Some specialized tools may be required. Level 3 = See your dealer. Click HERE or go to http://www.echo-usa.com/products/maintenance-kit HERE https://www.shindaiwa-usa.com/you-can.aspx For information about maintenance kits.

  • Page 31: Maintenance Intervals

    2 Apply lithium based grease every 50 hours of use. 3 Low evaporative fuel tanks DO NOT require regular maintenance to maintain emission integrity. * Replacement is recommended based on the finding of damage or wear during inspection. X7732274303 © 01/2020 ECHO Incorporated...

  • Page 32: Air Filter

    • Soak heavily soiled filters in water/detergent solution to loosen dirt, then brush lightly. • Rinse with clean water and allow to dry completely before reuse. Install air filter in air filter case. Install air filter cover. X7732274303 © 01/2020 ECHO Incorporated...

  • Page 33: Fuel Filter

    2012 and later equipment, only fuel supply hoses certified by EPA can be used to replace the original equipment supply hose. Fines up to $37,500 may be enforced for using an un-certified replacement part. X7732274303 © 01/2020 ECHO Incorporated...

  • Page 34: Spark Plug

    • Air intakes are blocked, preventing cooling air from reaching the cylinder. • Dust and grass build up on the outside of the cylinder. This build up insulates the engine and prevents the heat from leaving. X7732274303 © 01/2020 ECHO Incorporated...
  • Page 35 (A). Remove engine cover (B). DO NOT use a metal scraper to remove dirt from the cylinder fins. Use a brush to remove dirt from the cylinder fins. Remove ignition wires from clip for cleaning. X7732274303 © 01/2020 ECHO Incorporated...

  • Page 36: Exhaust System

    Clean carbon deposits from muffler components. Note: When cleaning carbon deposit, be careful not to damage the catalytic element inside muffler. Replace screen if it is cracked, plugged, or has holes burned through. Assemble components in reverse order. X7732274303 © 01/2020 ECHO Incorporated...
  • Page 37 Tighten muffler mounting bolts (or nuts) to 90-110 kgf•cm (80-95 in•lbf). Install engine cover and attach spark plug lead. Start engine, and warm to operating temperature. Stop engine, and re-tighten mounting bolts (or nuts) to specifications. X7732274303 © 01/2020 ECHO Incorporated...

  • Page 38: Carburetor Adjustment

    To maintain proper engine operation and emission compliance above 330 m (1100 ft.) ASL the carburetor may need to be adjusted by an authorized ECHO service dealer. If the engine is adjusted for operation above 330 m (1100 ft.) ASL, the carburetor must be re-adjusted when operating the engine below 330 m (1,100 ft.) ASL, otherwise severe engine damage may result.

  • Page 39: Lubrication

    Lubrication Level 1. Parts Required: Lithium Based Grease. Drive Shaft Upper Loosen clamping knob (A) Pull locater pin (B) and rotate ¼ turn counterclockwise to lockout position. Remove attachment. X7732274303 © 01/2020 ECHO Incorporated...

  • Page 40: Lubrication

    Parts Required: Lithium Based Grease. Gear Case Gear cases without grease plug (A) do not require lubrication. Clean all loose debris from gear case. Remove plug (A) and check level of grease. Add grease if necessary. DO NOT over-fill. X7732274303 © 01/2020 ECHO Incorporated...

  • Page 41: Nylon Line Head Disassembly Instructions

    However, if circumstances require disassembly, follow these instructions. Press top of locking tabs (A) on ® both sides of Speed Feed head to release cover (B) from eyelet carrier (C). Remove cover from eyelet carrier. X7732274303 © 01/2020 ECHO Incorporated...

  • Page 42: Nylon Line Replacement

    Hold trimmer head while turning knob clockwise to wind line onto spool until about 13 cm (5 in.) of each line remains exposed. Trimmer head is now fully loaded and ready for operation. X7732274303 © 01/2020 ECHO Incorporated...

  • Page 43: Sharpening Metal Blades

    DO NOT file the ‘gullet’ (radius) 30º of the tooth with the flat file. The radius must remain. A sharp corner will lead to a crack and blade failure. X7732274303 © 01/2020 ECHO Incorporated...
  • Page 44 After sharpening teeth, check CUTTING each tooth radius for evidence TOOTH GULLET of a square (sharp) corner. Use AREA 30º (RADIUS) the round (rat tail) file to renew the radius. CUTTING TOOTH RADIUS X7732274303 © 01/2020 ECHO Incorporated...

  • Page 45: Troubleshooting

    Clean or replace runs, but dirty dies Contaminants Fuel filter Replace filter or Fuel filter or residue in dirty replace fuel fuel Engine does not Fuel vent Contaminated acceler- Fuel vent Clean or replace plugged fuel properly X7732274303 © 01/2020 ECHO Incorporated...

  • Page 46: Storage

    Do not store your unit for a prolonged period of time (30 days or longer) without performing protective storage maintenance which includes the following: Store unit in a dry, dust free place, out of the reach of children. X7732274303 © 01/2020 ECHO Incorporated...

  • Page 47: Storage Hook Installation

    10. Install the spark plug. Connect the spark plug lead to the spark plug. Storage Hook Installation Insert small end of hook into locating hole on attachment shaft. Slide plastic cap onto end of attachment shaft. X7732274303 © 01/2020 ECHO Incorporated...

  • Page 48: Specifications

    635 mm (25.01 in.) Width 231 mm (9.10 in.) Height 212 mm (8.35 in.) Weight (dry) 1.76 kg (3.89 lbs.) Drive Shaft 6.35 mm (0.25 in.) Steel shaft Maximum Air Speed 160 kph (100 mph) X7732274303 © 01/2020 ECHO Incorporated...

  • Page 49: Echo Optional Attachments

    Read and comply with all safety instructions listed in this manual and attachment manual. ECHO, INC. will not be responsible for the failure of cutting devices, attachments or accessories which have not been tested and approved by ECHO for use with these units.

  • Page 50: Product Registration

    Please go to http://www.echo-usa.com/Warranty/Register-Your-ECHO to register your new product on-line. It's FAST and EASY! NOTE: your information will never be sold or misused by ECHO, Inc. Registering your purchase enables us to contact you in the unlikely event of a service update or product recall, and verifies your ownership for warranty consideration.
  • Page 51 PAS-225 PRODUCT REGISTRATION X7732274303 © 01/2020 ECHO Incorporated...
  • Page 52 T99913001001 - T99913999999 S06400369501 - S06400999999 S68600001001 - S68600999999 ECHO INCORPORATED 400 Oakwood Road Lake Zurich, IL 60047 www.echo-usa.com...

Table of Contents