Sanyo A11H Series Battery Replacement Procedure page 8

For Rack Type
I
nsert the tabs into the slots and
slide it to the right until you hear a
⑫
click sound. Secure it with the
screws.
For Tower Type
（１ｋＶＡ）
（2ｋＶＡ / 3ｋＶＡ）
Insert the tabs into the slots and slide it down until
you hear a click sound. Secure it with the screws.
⑫
Attach and slide the front
covers in the direction of the
⑬
arrow until the claw hook.
For service personnel only
Slide the switch
to
⑨ ⑪
｢Inverter｣.
⑬ Push the front
cover until the claw
hook to the left side.
⑫ Insert the tabs into the slots and slide it down until
you hear a click sound. Secure it with the screws.
⑬ Attach and slide the front
cover in the direction of the
arrow until the claw hook.
For service personnel only
Slide the switch
to
⑨ ⑪
｢Inverter｣.
8
Caution
Forced Bypass
If the is on
｢ Inverter ｣ side 。
If the UPS is in operation, the 【 INV.ON/STAND BY
green 】 is blinking 、 Press
check if 【 INV.ON/STAND BY green 】 turns on, then
proceed to step ⑫.
For service personnel only
Slide the switch
to
⑨ ⑪
｢Inverter｣.
Bypass ｣ side, set it to
｢
for 1 second and