When it is not used as a UL
Standard.
Make sure that LED 【 OUTPUT green 】 and 【 INV.ON/STAND BY green 】 on the front panel are blinking.
⑩
Press
Confirm the switch Forced Bypass is on the 「 Inverter 」 side, the LED 【 OUTPUT green 】 and 【 INV.ON/STAND BY green 】 on
the front panel are lit (when the UPS is in operation).
⑪
Install the battery cover.
⑫
Fit the front cover
⑬
When it is used as a UL Standard
(for service personnel)
for over a second.
7
When it is used as a UL Standard and CE Marking
Conformity Product (for service personnel)
Set the switch Forced Bypass
⑨
to 「 Inverter 」 side.