Table of Contents
Advertisement
22
en | Setup tasks
1.
2.
3.
4.
5.
6.
7.
The new disk array appears in the Disk Array List on the Information tab.
Advanced Configuration
When you select the Advanced Configuration option, the advanced configuration screen
displays.
2019-10 | V01 | F.01U.380.028
Check the boxes to select any one or a combination of:
–
Redundancy - The array remains available if a physical drive fails
–
Capacity - The largest possible amount of data capacity
–
Performance - The highest possible read/write speed
–
Spare Drive - A hot spare drive is created when you select Redundancy, Spare Drive,
and five or more un-configured physical drives are available.
In the Number of Logical Drives field, enter the number of logical drives you want to
create from this disk array.
–
The maximum possible number of logical drives appears on the right of this field.
From the Application Type menu, select an application that is best for you to use this
disk array:
–
File Server
–
Video Stream
–
Transaction Data
–
Transaction Log
–
Other
Click the Update button.
Or check the Automatic Update box. The updating runs automatically. The following
parameters display:
–
Disk Arrays - The number of physical drives in the disk array, their slot numbers,
configurable capacity, and the number of logical drives to be created.
–
Logical Drives - The slot number of the logical drive(s), their RAID level, capacity,
and stripe size.
–
Spare Drives - The physical drive slot number of the dedicated hot spare drive
assigned to this disk array (all RAID levels except RAID 0).
If you accept these parameters, proceed to the next step.
–
If you do not accept these parameters, review and modify your selections in the
previous steps.
Click the Submit button.
Quick installation guide
CIP5000 series storage
Bosch Security Systems B.V.
Advertisement
Table of Contents
