Table of Contents
Advertisement
CIP5000 series storage
LED
PSU 1 or PSU 2
4.5.5
Rear panel LED behavior
When system boot-up is finished, use the LEDs on the controller on the rear of the device to
monitor various functions.
LED
Ethernet
Link/Act and Speed
4.6
Task 6: login to windows
For Windows installations, once the system has booted up it is necessary to configure various
options to complete the OS setup.
You will be prompted to select a default language and other user interface preferences. Obey
the instructions on screen to complete your preferences selection and to create a user name
and password for the administrator. After completing these final tasks, the Windows desktop
appears.
There are two quick link icons, one for a web browser connection to CIP Management GUI,
and the other for the file that contains user documents.
4.7
Task 7: create logical drives
This section describes how to configure logical drives (LD) using the CIP Management GUI.
Bosch Security Systems B.V.
Description
Green - normal operation
Red or Orange - a problem or unit failure
Description
The LED locates on the upper left of each port:
Orange - Ethernet connected.
Orange flash - There is activity on the port.
Off steady - No connection has been established.
The LED locates on the upper right of each port:
Orange - 100 Mbps
Green - 1000 Mbps
Quick installation guide
PSU 1
LED
PSU 2
LED
2019-10 | V01 | F.01U.380.028
Setup tasks | en
19
Advertisement
Table of Contents
