Technical Specifications - eisenblatter VARILEX 1802 HT Original Instructions Manual

EN
Original instructions VARILEX

7. Technical specifications

Subject to change in accordance with technical progress.
Measured values determined in conformity with
EN 60745.
Direct current (cordless machines)
~ Alternating current (mains powered
machines)
Machine in protection class II
(mains powered machines)
During operation the noise level can exceed 80 dB(A).
Wear ear protectors!
Max. disc diameter
Max. permitted thickness of the clamping
shank on accessory when using clamping
nut (A8-4/B12-4)
Roughing disc/cutting disc:
max. permitted disc thickness
Spindle thread / length of grinding spindle
No-load speed (maximum speed)*
No-load speed (adjustable)*
Voltage of battery pack
Rated input power
Power output
Weight without mains cable /
Weight with smallest battery pack
Emission values:
Vibration emission value (surface grinding) /
uncertainty (vibration)
Vibration emission value (sanding with
sanding plate) / uncertainty (vibration)
Typical A-effective perceived sound levels:
Sound-pressure level / uncertainty
Acoustic power level / uncertainty
24
1802 HT / VARILEX AKKU PRO HT
® ®
*VARILEX
interferences can cause speed fluctuations. The
fluctuations disappear, however, as soon as the interfer-
ence fades away. The technical specifications quoted are
subject to tolerances (in compliance with the relevant
valid standards).
to compare different power tools. The actual load may be
higher or lower depending on the operating conditions,
the condition of the power tool or the accessories. Please
allow for breaks and periods for assessment purposes
when the load is lower. Arrange protective measures for
the user, such as organisational measures based on the
adjusted estimates.
Vibration total value (vector sum of three directions)
determined in accordance with EN 60745:
Ø D mm (in)
t mm (in)
max,1
t mm (in)
max,2
M / l – / mm (in)
n min
n
V
U V
P W
1
P W
2
m kg (lbs)
a / K m/s
h, SG h,SG
a / K m/s
h, DS h,DS
L / K dB(A)
pA pA
L / K dB(A)
WA WA
1802 HT: High-energy, high-frequency
®
Emission values: These values make it possible
to assess the emissions from the power tool and
VARILEX 1802 HT
®
150 (6)
7.1 ( 9 / )
32
M 14 (5/8"-11 UNC) / 20 (25/32)
(rpm) 8,900
-1
2,400
–
1,750
1,070
2.6 (5.7)
8.2 / 1.5
2
4.0 / 1.5
2
94 / 3
105 / 3
VARILEX AKKU
®
PRO HT
125 (5)
3
10 ( / )
8
6( 1 / )
4
5,600
–
18
–
–
1.9 (4.2)
4.5 / 1.5
< 2.5 / 1.5
83 / 3
94 / 3
www.eisenblaetter.de