Download Print this page

Tricity Bendix TM 560 Operating & Installation Instructions Manual: Levelling; Door Reversal

Tricity bendix tumble dryer operating & installation instructions tm 560.
Hide thumbs


The tumble dryer must be installed in a clean place,
where dirt does not build up.
When operating the tumble dryer, the room tempera-
ture must not exceed 35°C, as it may affect the perfor-
mance of the appliance.
To save energy, the room temperature should not be
lower than +15°C.


Make sure there are no
obstructing items or
material near the air-in-
take louvres provided at
the back (e.g. paper,
Level the tumble dryer
into place by screwing or
unscrewing the front feet
as required.
Accurate levelling will
keep vibration and
noise to a minimum
when the dryer is in

Door reversal

To make it easier to load or unload the laundry the
door can be reversed.
This operation must be carried out by qualified
Operate as follows:
- Remove the door by unscrewing the two screws (1)
fastening the hinge to the cabinet (Fig. A).
- Remove the safety catch (2) by pressing it down-
wards (Fig. A) and refit it on the opposite side of the
- Using a screwdriver, remove screws (3), plastic
plate (4) and plug (5), see picture A. Take care not
the damage the cabinet.
Refit them on the opposite side (Fig. B)
- Refit the door by screwing in the two screws (1)
which fasten the door to the cabinet (Fig. B).


   Related Manuals for Tricity Bendix TM 560

Comments to this Manuals

Symbols: 0
Latest comments: