Breville Hot Cup Instructions For Use Manual page 8

Descaling
Descaling your Hot Cup
To maintain it's performance, your Hot Cup will require descaling once every three
months or so. You may need to descale your Hot Cup more frequently if you live in a
hard water area.
1. Fill your Hot Cup to the MAX fill level and place an empty cup on the drip tray. Set
the on/off switch to the on position and wait for the water to be dispensed into the
cup.
2. Add a citric acid-based proprietary descaling product to the hot water in the cup
and stir.
3. Tip the contents of the cup into your Hot Cup and close the lid.
4. Place the empty cup on the drip tray and set the on/off switch to the on position.
5. Wait for the water to be dispensed into the cup.
6. Discard the water from the cup.
7. Repeat steps 4, 5 and 6 until the water level is at the MIN mark. Open the lid and
empty any remaining water into the sink. Rinse your Hot Cup by filling it with clean
water and emptying it into the sink (see Emptying your Hot Cup on page 6).
Fill your Hot Cup with fresh water to the MAX fill level and place an empty cup on
the drip tray.
8. Set the on/off switch to the on position and wait for the water to be dispensed into
the cup.
9. Discard the water in the cup.
10. Repeat steps 8 and 9 until the water level is at the MIN mark. Open the lid and
empty any remaining water into the sink (see Emptying your Hot Cup on page 6).