Advertisement
PART A Receipt, Storage & Safety
1.3 Transport
The circuit- breakers shall be transported in packed
condition only. Following precautions are to be
taken while transporting:
1.4 Lifting
Before lifting the case, observe the information on it
(such as symbol, weight, etc.). The cases shall be
Lifting the case
Case marking
900
Cabinet
Ensure that packing cases are not placed on
wet surfaces / waterlogged areas.
Breakers should not be stacked one over the
other.
Lifted by a lifting device equipped with forks or
slings. If a crane is used, slings shall be used. The
units must not be rolled or dropped.
Duct with pole
2110
Loose structure(optional)
1730
Structure
7
Advertisement
