Samsung HW-S60T Full Manual page 19

3. Press and hold the Up button on the Soundbar remote control for 5 seconds or press the ID SET
button on the bottom of the Soundbar.
• Until pairing is complete, the Multicolor LED changes as Red → Green → Blue in turn.
Rear Speaker, Woofer Pairing button
5 Sec
CAUTION
ID SET
• If your Soundbar was playing music when it connects to the SWA-8500S, you may hear some
stuttering from the woofer as the connection finalizes.
4. Check if the LINK LED is solid blue (connection complete).
STANDBY
STANDBY
LINK
5. If the SWA-8500S is not connected, repeat the procedure from Step 2.
ID SET NETWORK
OR
ID SET NETWORK
Bottom of the Soundbar
Main Unit
SERVICE
NETWORK
SERVICE
LINK
Blue is On
DIGITAL AUDIO IN HDMI
(OPTICAL) (ARC)
ID SET NETWORK
SERVICE DC 19V
DIGITAL AUDIO IN
(OPTICAL)
SERVICE DC 19V
DIGITAL AUDIO IN
(OPTICAL)
SERVICE DC 19V
DIGITAL AUDIO IN HDMI
(OPTICAL) (ARC)
SERVICE DC 19V
DIGITAL AUDIO IN HDMI OUT
(OPTICAL) (TV-ARC)
DC 19V
DIGITAL AUDIO IN HDMI
(OPTICAL) (ARC)
DC 19V
The LINK LED indicator stops blinking and
glows a solid blue when a connection is
established between the Soundbar and the
Wireless Receiver Module.
ENG - 19
LED Indicator
HDMI OUT
(TV-ARC)
→ →
Red Green Blue Blinks
HDMI
(ARC)
DIGITAL AUDIO IN
(OPTICAL)
Pairing
Cyan Blinks X3
Connection is complete
DIGITAL AUDIO IN
(OPTICAL)