Troubleshooting - Zanussi ZCAN20FW1 User Manual

Hide thumbs Also See for ZCAN20FW1:
Table of Contents

Advertisement

2. Remove any stored food, wrap it in several
layers of newspaper and put it in a cool place.
3. Remove the drain plug from the inside of the
appliance.
4. Leave the lid open.
5. Place a tray beneath the outer drain plug.
6. Pull out the outer drain plug.
7. Rotate the drain plug 180 degrees to let the
drain water flow into the tray.

TROUBLESHOOTING

WARNING! Refer to Safety chapters.
WHAT TO DO IF...
There are sounds which may occur during the operation of the appliance (e.g. bubbling,
whirring, cracking or clicking), which are normal.
Problem
The appliance does not oper-
ate.
12
8. Clean the interior and dry it thoroughly.
9. Switch on the appliance.
10. Set the temperature to MAX setting and close
the lid. Wait two or three hours before you
reload previously removed food into the
appliance.
11. Set the temperature to the desired setting.
Possible cause
The appliance is switched off.
The mains plug is not connec-
ted to the mains socket cor-
rectly.
There is no voltage in the
mains socket.
Make sure the water does not spill out
of the tray.
Solution
Switch on the appliance.
Check if the appliance is plug-
ged correctly.
Connect the appliance to a
different electrical mains sock-
et. Contact a qualified electri-
cian.

Advertisement

Table of Contents
loading

Table of Contents