Specific References For The Hydraulic Machines - R2 TST Series Instruction And Maintenance Manual

Specific references for the hydraulic machines

(*note 1 mod. hi)
The TST hi have been designed to be
applied to hydraulic machines which
have an oil pressure between 150 and
180 bar.
1- Register adjustment roller (screw
crank )
2- Hydraulic motor
(*note 2 mod. hi)
Maximum height from the ground
Oil pressure requested
Technical specifications of the hydaulic motor.
NOTE: the following data which concerns to the engine specifications are given by the manufacturer of the
hydaulic motor; for the specifications of the engine application to the R2 machine look at the previous table
and to the considerations of the following notes
Data
Geometric displacement (cm³/rev.)
Max input pressure (bar)
Max operating pressure (bar)
Max torque (daNm)
Max flow (l/min)
max rotating speed (rpm)
Max power (kw)
Max cont. Return pressurewithout drain line (bar) 0 ÷ 100 rpm
Max cont. Return pressurewithout drain line (bar) 100 ÷ 300 rpm
Max cont. Return pressurewithout drain line (bar) > 300 rpm.
Max return pressure with drain line (bar)
Max starting pressure with no load (bar)
Min. starting torque (daNm) at max. ΔP
14
Fig. 19
TST 100 hi TST 113 hi
55 cm 55 cm
150 - 180 bar 150 - 180 bar
ENGLISH
1
2
Model
TST 130 hi TST 150 hi
55 cm
150 - 180 bar 150 - 180 bar
Valore (Funz. Cont.)
55 cm
102
210
175
26
75
735
17
75
50
25
140
12
21,5
14