Seiko QT-7800 Series Operating Manual page 2

－CAUTION－
(1) This manual is the property of SEIKO and may not without the express written consent of SEIKO be
copied or reproduced in any form, in whole or in part, or used for any purpose other than that for
which it is supplied.
(2) This manual may be subject to change without notice.
(3) This manual has been prepared to give complete information necessary for the operation, use,
handling and maintenance of MODEL QT-7800 Series. For the purpose of our constant technical
manual improvement program, your questions, advice, suggestions and comments on the
descriptions, illustrations, procedures or any matter concerning this manual are highly appreciated.
(4) SEIKO shall have no liability to the user in respect of any loss or damages, whether consequential
or incidental, sustained by the user if such loss or damages are:
1) due to abuse, misuse, failure to observe instructions given in the manual furnished by SEIKO
and neglect of other reasonable care and servicing due to be done by the user irrespective of
such instructions, and failure due to deliberate actions or gross negligence or accident;
2) caused by changes, modifications, or alterations made without prior written consent of SEIKO
or by any person other than authorized by SEIKO; or,
3) due to negligence on the part of the user of what should be done or should not be done as a
good caretaker of Yearly Programmable Timer Model QT-7800 Series.
－ SAFETY ALERT SYMBOLS －
The symbols and terms used in this manual have the meaning as explained below:
DANGER
WARNING
The following pictorial symbols indicate what must NOT be done.
General
prohibitions
The following pictorial symbols indicate what must
General
instructions
DANGER is used to indicate the presence of an imminent
hazard which is likely to cause severe personal injury, death,
or substantial property damage if the instructions under this
heading are ignored.
WARNING is used to indicate such operational procedures,
practices, or situations that may result in severe personal
injury or loss of life if relevant instructions are not followed
correctly.
Prohibition
against
disassembly/
tampering
Connection of
grounding
conductor
Prohibition
against
exposure to
water
be done.
Prohibition
against touch