Download Print this page

SwedeSolutions CFE Plus Installation Manual

Hldf p3 video installation
Hide thumbs Also See for CFE Plus:

Advertisement

Quick Links

INSTALLATION MANUAL
HLDF P3 Video
installation
INSTALLATION: CFE PLUS P3 VIDEO
WHAT IS THE CFE PLUS
The CFE-Plus (Canbus Function Extender Plus edition) is an add-on CPU (Computer) for your Volvo.
Since it acts as another CPU in your Volvo, the CFE Plus is capable of adding functions. (See the CFE Product
page on our website for details on all possible functions).
The CFE Plus comes as an OBD dongle. (OBD is On Board Diagnostics; a connector available at the door side of
the steering wheel, behind a small hatch).
For Volvo's of the P3 type ( S60, V60, XC60, V70, XC70, S80 MY 2007 – 2018) and V40/V40 CC a more or less
special extra feature has been made available; controlling the HLDF / ICM / IHU (which is the Volvo's original
RTI Navigation screen or Internal Head Unit) in such a way that a direct hookup of for example a reversing-
and-or front-camera or external video player/navigation device/mirrorcast/airplay device is possible without
any additional interface!
This manual describes how to connect and control this extra feature and how to connect a device to the HLDF
/ ICM / IHU, it does not describe the actual camera mounting, for that other documents are available.
KNOWLEDGE/TOOLS AND EXTRA'S REQUIRED
To be able to connect any device to the HLDF/ICM/IHU you'll need at least the following tools and extra's.
* Fishbone tool * Torx 20 screwdriver * Size 8 and 10 wrench (alternatively : flat bottom pliers)
For P3 2007-2011 (popup screen) : Preferably also Volvo specific tool with part number : 9512943 or an alter-
native tool to remove the cover around the HLDF.
In case you do not have the tool mentioned above (or a similar tool) available, we strongly suggest to ask your
local Volvo dealer for support on removal of the panel around the screen (See installation procedure 'step 1') !
© 2020 SwedeSolutions the Netherlands - info@swedesolutions.com - www.swedesolutions.com
Instruction# 1697
Version# 1.06
Part# ntbp
EAN#
Author: KW

Advertisement

loading
Need help?

Need help?

Do you have a question about the CFE Plus and is the answer not in the manual?

Questions and answers

Summary of Contents for SwedeSolutions CFE Plus

  • Page 1 The CFE-Plus (Canbus Function Extender Plus edition) is an add-on CPU (Computer) for your Volvo. Since it acts as another CPU in your Volvo, the CFE Plus is capable of adding functions. (See the CFE Product page on our website for details on all possible functions).
  • Page 2: First Steps

    For P3 2007-2011 with HLDF (popup navigation): Connect the CFE Plus to your Volvo as you would do normally , make sure initialization is finished and then press [* Auto] and at the same time button [1] (or alternatively [EXIT] and at the same time [1]. The HLDF should switch over from displaying the RTI navigation to the video-1 source (nothing connected to that source yet), which should result in a dark black screen.
  • Page 3: Installation Procedure

    CFE-Plus MY 01-04 Harness cally engaged the moment your Volvo is switched into reverse gear. The camera options will be partially ena- bled in the original Sensus menu by the CFE Plus. INSTALLATION PROCEDURE FOR P3 2007-2011 Independent of what will be connected to the available video sources on the HLDF, the HLDF has to be tempo- rary removed from the bracket.
  • Page 4 2 -> Pull the DIM forward and out after tilting it down towards the steering wheel. 3 -> disconnect the DIM and remove it. 4 -> guide any video harness towards the HLDF as suggested. © 2020 SwedeSolutions the Netherlands - info@swedesolutions.com - www.swedesolutions.com Instruction# 1697 Version# 1.06...
  • Page 5 1 -> Remove the 2 torx (size 20) screws and remove the panel. 2 -> Remove the 2 torx (size 20) screws. © 2020 SwedeSolutions the Netherlands - info@swedesolutions.com - www.swedesolutions.com Instruction# 1697 Version# 1.06 Part# ntbp...
  • Page 6 Dry area (reachable without lifting the car) Wet area (car needs to be lifted to reach the rubber in the engine bay) © 2020 SwedeSolutions the Netherlands - info@swedesolutions.com - www.swedesolutions.com Instruction# 1697 Version# 1.06...
  • Page 7 Any device (globally, so region independent!) to be connected to one of the available port offer a Composite NTSC signal output. 1 -> Connect video sources to the green and brown connector. (If camera’s were bought with SwedeSolutions.com, a matching connector has been supplied, alternatively the connector with conversion to RCA is available separately at SwedeSolutions.com) Generally BROWN is for Reverse camera and GREEN for front camera / other video usage.
  • Page 8 Step 1 : Remove the cover and remove the connector. Step 2: Remove the torx screws Step3: Remove the panel (both sides) and disconnect connectors: © 2020 SwedeSolutions the Netherlands - info@swedesolutions.com - www.swedesolutions.com Instruction# 1697 Version# 1.06 Part# ntbp...
  • Page 9 In case a connector is already taken (used), just remove the installed connector. (In such case some pre-wiring is available in the car, but for this installation it will not be used!) © 2020 SwedeSolutions the Netherlands - info@swedesolutions.com - www.swedesolutions.com Instruction# 1697 Version# 1.06...
  • Page 10 (For V40, go to step 9) Guide wires downwards, preferably on the right hand side. Then fold the carpet away from the tunnel and find the connector as shown. © 2020 SwedeSolutions the Netherlands - info@swedesolutions.com - www.swedesolutions.com Instruction# 1697 Version# 1.06...
  • Page 11 (camera hookup : see specific manual about camera hookup). The next steps only V40! First remove the carpet from the center console. Step 9: © 2020 SwedeSolutions the Netherlands - info@swedesolutions.com - www.swedesolutions.com Instruction# 1697 Version# 1.06 Part# ntbp EAN#...
  • Page 12 Step 11: Carefully pry away the protecting tape. Step 12: Connect the camera positive(+) red to the brown-white cable. Step 13: Connect the camera Negative(-) black to the black-white cable. © 2020 SwedeSolutions the Netherlands - info@swedesolutions.com - www.swedesolutions.com Instruction# 1697 Version# 1.06...
  • Page 13 Strip (1) the wire to be connected to at a place where you can reach it good enough to make an ‘eye’ (2) with a sharp ob- ject and to put the CFE Plus cable (3) trough, twist it and cover it with isolation tape.