The dimensions of the main LED housing, a cylindrical aluminum lathed part, are Ø115mm with 301 mm length. The height with bracket is max. 178 mm. StarEye Profile LUX LUMEN - Kernenergiestraat 53A - 2610 WILRIJK - BELGIUM p.4/25 High Power 45W T: +32 3 293 35 50 – www.lux-lumen.com...
Safety information Before installing, powering up, or servicing the StarEye Profile LED-unit, it is highly recommended that you read this manual and ensure yourself that you completely understand its content. Observe the safety precautions in this manual. Install and operate the LED-unit only as described in this manual, and in conformity with local regulations.
Do not modify the LED fixture, in a way, not described in this manual. StarEye Profile LUX LUMEN - Kernenergiestraat 53A - 2610 WILRIJK - BELGIUM p.6/25 High Power 45W T: +32 3 293 35 50 – www.lux-lumen.com...
Physical installation Thank you for selecting this StarEye Profile LED-unit as best solution in your setup. Warning! Read the safety precautions in this manual before integrating this LED-unit into your installation. Installation must be carried out by qualified professionals only.
External connections 5.1 DC power input Safety precautions Never connect the live power on the input terminals of the StarEye Profile LED-unit! In case of doubts, contact your point of sale. Polarity The StarEye Profile LED-unit is polarity sensitive. So observe polarity and cabling: •...
EMC and safety requirements The StarEye Profile LED-unit is fully compliant to the LVD and EMC directive of the European council, if used in a properly designed setup. The StarEye Profile LED-unit is only intended to be used in lighting...
Installation setup 7.1 Specification The StarEye Profile LED-unit is an efficient solution for gobo projection. It is possible to use a glass or metal gobo to project an image. The light beam angle can be manipulated with the position of the lenses in the projector.
Never use solvents to clean the outer housing of the unit. Never use water, or wet cloth. StarEye Profile LUX LUMEN - Kernenergiestraat 53A - 2610 WILRIJK - BELGIUM p.12/25 High Power 45W T: +32 3 293 35 50 – www.lux-lumen.com...
Gobos available on www.goboland.com. Step 1: Screw the front tube cover counterclockwise to remove it from the LED-unit base. StarEye Profile LUX LUMEN - Kernenergiestraat 53A - 2610 WILRIJK - BELGIUM p.13/25 High Power 45W T: +32 3 293 35 50 – www.lux-lumen.com...
Page 14
Release the metal spring that holding the gobo down. Use a small flathead screwdriver. Be careful not damaging the surface of the gobo. StarEye Profile LUX LUMEN - Kernenergiestraat 53A - 2610 WILRIJK - BELGIUM p.14/25 High Power 45W T: +32 3 293 35 50 – www.lux-lumen.com...
Page 15
If using a glass gobo, please be sure that the coated side or reflective side is towards the LED source. StarEye Profile LUX LUMEN - Kernenergiestraat 53A - 2610 WILRIJK - BELGIUM p.15/25 High Power 45W T: +32 3 293 35 50 – www.lux-lumen.com...
Page 16
Step 5: Put the metal gobo protection ring back in place. StarEye Profile LUX LUMEN - Kernenergiestraat 53A - 2610 WILRIJK - BELGIUM p.16/25 High Power 45W T: +32 3 293 35 50 – www.lux-lumen.com...
Page 17
Put the metal spring back in place. Use a small flathead screwdriver. Be careful not damaging the surface of the gobo. StarEye Profile LUX LUMEN - Kernenergiestraat 53A - 2610 WILRIJK - BELGIUM p.17/25 High Power 45W T: +32 3 293 35 50 – www.lux-lumen.com...
Page 18
Screw the tube hand tight and don’t use mechanical tools to fasten the tube! StarEye Profile LUX LUMEN - Kernenergiestraat 53A - 2610 WILRIJK - BELGIUM p.18/25 High Power 45W T: +32 3 293 35 50 – www.lux-lumen.com...
8.4 Changing zoom and focus: The StarEye Profile has a zoom range from 16° to 24°. The desired size of the beam and focus of the gobo can be selected by moving the two front lenses. Step 1: Screw the front tube cover counterclockwise to remove it from the LED-unit base.
Page 20
Step 3: Move the two lenses to the right position for the desired beam angle and focus. StarEye Profile LUX LUMEN - Kernenergiestraat 53A - 2610 WILRIJK - BELGIUM p.20/25 High Power 45W T: +32 3 293 35 50 – www.lux-lumen.com...
Page 21
Screw the tube hand tight and don’t use mechanical tools to fasten the tube! StarEye Profile LUX LUMEN - Kernenergiestraat 53A - 2610 WILRIJK - BELGIUM p.21/25 High Power 45W T: +32 3 293 35 50 – www.lux-lumen.com...
Lux Lumen Kernenergiestraat 53 A 2610 Wilrijk Belgium Any cost of secure transportation of the product to and from Lux Lumen service department, will be borne by the customer. Limitations Lux Lumen will not warrant the following: • Periodic check-ups, maintenance and repair or replacement of parts due to normal wear and tear.
IP and IK degree, mentioned in the product specifications in this manual. Repairs, modifications or cleaning carried out by a non Lux Lumen service centre. Use of spare parts, software or consumables, which are not compatible with the product.
Page 24
Customer sends material (include a copy of the RMA document with the material) Step 4: Lux Lumen evaluates and informs the client if repair is under warranty, or – if not - makes an offer for repair to the client. StarEye Profile LUX LUMEN - Kernenergiestraat 53A - 2610 WILRIJK - BELGIUM p.24/25...
Need help?
Do you have a question about the StarEye Profile and is the answer not in the manual?
Questions and answers