Download Print this page

Honeywell GSMX-AUDIO Cable Routing Instructions

Audio cable
Hide thumbs

Advertisement

Quick Links

GSMX-AUDIO and GSMV-AUDIO, Audio Cable Routing Instructions
For Online Support visit: http://www.security.honeywell.com/hsc/resources/MyWebTech/
Routing Instructions for the GSMX-AUDIO cable.
1.
At the GSMX, loosen the captive cover screw and swing the
cover open. Open the enclosure where the AVS Base Unit
resides.
2.
Ensure power is removed by disconnecting the GSMX's ECP
cable, and powering down the control and AVS Base Unit.
3.
Connect the 5-pin end of the audio cable to the audio
connector on the GSMX circuit board.
4.
Route the audio cable to the connector on the AVS Base
Unit.
5.
Connect the 4-pin end of the audio cable to the
connector on the AVS Base Unit.
6.
Ensure the audio cable ends are secured with tie
wraps to reduce strain.
7.
At the GSMX, connect the ECP cable. Close the cover
and tighten the captive screw.
8.
At the AVS Base Unit, close the enclosure.
9.
Power up the system, and test.
5-pin connector
AVS BASE UNIT
ON
ON
1
2
3
4
1
2
3
4
5
AUDIO
CONNECTOR
4-pin connector

Advertisement

loading

  Summary of Contents for Honeywell GSMX-AUDIO

  • Page 1 GSMX-AUDIO and GSMV-AUDIO, Audio Cable Routing Instructions For Online Support visit: http://www.security.honeywell.com/hsc/resources/MyWebTech/ Routing Instructions for the GSMX-AUDIO cable. At the GSMX, loosen the captive cover screw and swing the Connect the 4-pin end of the audio cable to the cover open. Open the enclosure where the AVS Base Unit connector on the AVS Base Unit.
  • Page 2 IC: Y267W - MC56 MAC LABEL HERE TB 1 Honeywell AVS BASE UNIT WARRANTY For the latest warranty information go to: http://www.security.honeywell.com/hsc/resources/wa/ 2 Corporate Center Drive, Suite 100 Ê800-06409FŠ P.O. Box 9040, Melville, NY 11747 Copyright  2010 Honeywell International Inc.

This manual is also suitable for:

Gsmv-audio