In The Event Of Scale Deposits; Inserting/Removing The Scale Fi Lter Insert; Storage - Silvercrest SWKT 3000 B2 Operating Instructions Manual

GB
IE

In the event of scale deposits:

Inserting/removing the scale fi lter insert

Storage

10
■ Clean the exterior surfaces and the power cable with a slightly damp cloth.
Be sure to dry the appliance well before taking it back into use. For stubborn
soiling use a mild detergent on the cloth. Ensure that there are no detergent
residues in and on the appliance before it is taken back into use.
Scale deposits on the bottom of the appliance lead to increased energy con-
sumption and reduce the service life of the appliance.
Descale the appliance as soon as scale deposits become apparent.
Before descaling, remove the scale fi lter insert 7 (see chapter "Inserting/
■
removing the scale fi lter insert").
■ Use a descaler designed for household appliances (e.g. for coff ee machines).
Proceed as detailed in the instructions provided for the use of the decalcifying
agent.
■ After descaling, rinse the appliance with lots of clean water.
1) Open the lid.
2) Pull the scale fi lter insert 7 upwards out of its holder while pressing lightly
against the top corners.
3) Clean the scale fi lter insert 7 with a slightly moistened dishcloth and under
running water.
4) After cleaning, insert the scale fi lter insert 7 again. Ensure that the holder
engages and that the scale fi lter insert 7 is fi rmly seated.
NOTE
If the scale deposits in the scale fi lter insert 7 have solidifi ed, place the
►
fi lter in a water-vinegar solution at a ratio of 6:1 for a few hours. The scale
deposits will dissolve themselves. Rinse the scale fi lter insert 7 with plenty
of clear water.
■ Allow the appliance to cool down completely before putting it into storage.
Wind the power cable around the cable winder 4 under the base 3.
■
■ Store the appliance at a dry location.
SWKT 3000 B2