Page 1
FPB30 Fire Bowl Setup f i r e - p a r t s . c o m...
Page 2
TABLE OF CONTENTS Fire Bowl Warranty..............................Table Of Contents............................... Warnings..................................FPB30 Fire Bowl Setup............................... 30FPB-KWK Decorative Key Way Valve Kit....................... Kingsman Outdoor Fire Pit Media Section........................f i r e - p a r t s . c o m WARNINGS ...
Page 3
FPB30 FIRE BOWL SETUP This is a Non-Combustible Enclosure. WARNING THE INSTALLATION OF THIS KIT MUST ONLY BE UNDERTAKEN BY A QUALIFIED AND CERTIFIED GAS APPLIANCE INSTALLER. PARTS LIST: Fire Bowl 30FPB-KWK – Decorative Key Way Valve Kit ...
Page 4
4. Place Filler Strip Ring onto Fire Pit inside Fire Bowl. See Kingsman Outdoor Fire Pit Media Section for media options. NOTE: ¾” Lava Rock in Kingsman Fire Pit can be replaced with a portion of ¼” Lava Rock from FPB30 Fire Bowl Kit...
Page 5
30FPB-KWK Decorative Key Way Valve Kit This Valve Kit can be used when installing your Fire Pit in a Non-Combustible Enclosure. WARNING THE INSTALLATION OF THIS KIT MUST ONLY BE UNDERTAKEN BY A QUALIFIED AND CERTIFIED GAS APPLIANCE INSTALLER. PROCEDURE: PARTS LIST: 1.
Kingsman Outdoor Fire Pit Media Section MEDIA REQUIREMENTS OPTIONS: (When not using LOGC85 Log Set) 20 LBS of Glass Required for Fire Pits, if using the Fire Bowl add an additional 10 - 15LBS One bag of MQSTONE may be used for the Fire Pit, if using the Fire Bowl an additional bag may be used. One bag of 1/4"...
Page 7
¼” Lava Rock & ¾” Lava Rock (Supplied with Fire Pit). ¼” Reflective Bronze Glass - (20LBS) (1/4” Lava Rock is used as Base.) f i r e - p a r t s . c o m MQSTONE with ¼” Lava Rock Base – (10LBS) MQSTONE with ¼”...
Need help?
Do you have a question about the FPB30 and is the answer not in the manual?
Questions and answers