Page 2
2 (6) 0.75 m NOTE: Foot tubes can be mounted to legs in two optional positions, depending on load requirements. 0.75 m 0.75 m Treston • 156 Bluffs Court, Canton, GA 30114 Tel. 800.437.6772 • Fax 770.720.6584 • infousa@treston.com • www.treston.us...
Page 4
STEP 5: Locate slotted hole on rear case and attach to STEP 6: Tighten bolts. table legs with M8 x 16 bolts, so that the slotted hole will be positioned under worksurface. Treston • 156 Bluffs Court, Canton, GA 30114 Tel. 800.437.6772 • Fax 770.720.6584 • infousa@treston.com • www.treston.us...
Page 5
Pre-drill holes and use wood screws provided Use 100% silicon adhesive STEP 11: Mount worksurface to frame, using one of the attachment methods suggested to the right. Treston • 156 Bluffs Court, Canton, GA 30114 Tel. 800.437.6772 • Fax 770.720.6584 • infousa@treston.com • www.treston.us...
Page 6
(do over bottom bolt. not remove). STEP 14: Reinsert removed bolt and retighten bolts to 27 Treston • 156 Bluffs Court, Canton, GA 30114 Tel. 800.437.6772 • Fax 770.720.6584 • infousa@treston.com • www.treston.us...
Need help?
Do you have a question about the 900020 and is the answer not in the manual?
Questions and answers