Table of Contents
Advertisement
07
01
02
09
10
03
06
05
08
Controls
Output level of the delay.
01 - LEVEL
02 - LEVEL T/2
table).
Number of repetitions, by means of analog feedback. At maximum, it
03 - REPEATS
will generate a runaway feedback. Feedback is taken from the output of the effect, so
it is affected also by both Level controls.
Modulation of the delay time. In mild settings, repetitions are
04 - MOD/DIV
04
blurred, achieving the organic tape echo sound. The depth increases up to ex-
treme effects of tape wow and vibrato. Holding down the Tap Tempo switch for 5
seconds, gives access to the DIV control, allowing you to select the mode and tap
subdivision. Turn the knob while the switch is held down, and release the switch
12
once the desired position is marked. For optimum performance, position the knob
to the center of the desired value.
Total delay time. From 160ms to 1200ms.
05 - TIME
11
Effect input, connect your instrument here.
06 - INPUT
Effect output, connect your amplifier here.
07 - OUTPUT
Power supply input, connect your dc adapter here.
08 - DC 9V
Output level of the first chip, with delay time T/2 (See Subdivisions
Advertisement
Table of Contents
