Control Panel Description; First Time Use - KitchenAid KDSDM 82130 Instructions For Use Manual

Control panel description

A B C
A. Program selection button
B. Multizone button
C. DynamicClean / Keylock (press 3 sec.)
D. Antibacterial Rinse / Settings (press 3 sec.)
E1. Display - Options area

First time use

After connecting the appliance to the power supply, the device must be programmed. The display will
guide the user to set up the appliance for first use.
1. The language selection
ENGLISH?
P =NO,
2. Setting the water hardness
WATER HARDNESS
<1=Min, 7=Max>
WATER HARD.= 4
P =NO,
Detergents
When using Powder or Gel you must add
regeneration salt and set up water hardness
level as indicated in the table below.
1. Ask your water supply company what the water hardness is...
German
degrees °dH
0 -5
6 - 10
11 - 15
16 - 21
22 - 28
29 - 35
36 - 50
E1
D
To select preferred language please press
pressing
After language confirmation, the appliance will go through the
| >| |=YES
settings.
The water hardness is by default set to level 4. To change water
hardness level press
To confirm your choice press
| >| |=YES
French English
degrees °fH degrees °eH
0 - 9 0 - 6.3
10 - 18 7 - 12.6
19 - 27 13.3 - 18.9
28 - 37 19.6 - 25.9
38 - 50 26.6 - 35
51 - 63 35.7 - 44.1
64 - 90 44.8 - 62.4
E2 E3
E2. Display - information area
E3. Display - status area
Delay
F.
G. Cancel/Reset (drain water when pressed 3 sec.)
H. Start/Pause
button.
button repeatedly.
button. The level must be set according to the table below.
Also, when using Tablets which include salt
unctionality you must still add regeneration
salt.
Water hardness
level
Soft
Medium
Average
Medium-hard
Hard
Very hard
Extremely hard
7
F G H
button. Confirm
2. ...enter this value on
your dishwasher
Insert value is shown in
the display
1
2
3
4
5
6
7
SALT
required
NO
YES