KitchenAid KDSDM 82130 Instructions For Use Manual page 21

The appliance...
Display shows:
PRESS | >| |AND
CLOSE THE DOOR
Display shows:
OPEN AND CLOSE
THE DOOR
Display shows:
CLOSE WATER NOW
CALL THE SERVICE
MORE INFORMATION IS
AVAILABLE IN
THE INSTRUCTIONS
(CODE F8-E1) or
display shows other fault display:
Fx-Ey
After taking the above action, the fault message must be reset. In the majority of cases the fault is thus
eliminated.
RESET:
- Press the button for 3 seconds;
- Close the door;
- Water drains automatically for up to 1 minute;
- The appliance is now ready to be started.
Possible causes...
Door is not closed with in 3 seconds
of button press.
The door was not open between
cycles.
Appliance has technical defect.
21
Solutions...
Press again and close the
appliance door within 3 seconds.
Unload appliance (if not unloaded
before), open and close the door.
Call factor customer service (state
fault displayed).
Close the water tap.