Inalsa Micro WD10 Instruction Manual And Warranty Card page 7

How to Use
1. Used for dry
Use the dust bag when used for dry only ,easy to clean.
• Open the clip, take out the machine head, then cover the dust bag on the bottom basket, then
fix with a fixator. (filter holder ring)
• After the machine head is put into the plastic bucket, the machine can start to work after
locked two sides of the locks.
• When finish the cleaning or too much garbage is sucked into the bucket, the suction force
drops obviously. Please cut off the power and clean up the garbage in the barrel timely.
I. Open the clip, take out the machine head.
II. Clean up the garbage in the barrel, then put machine head and locked it.
(The filter bag is consumable, please clean or replace timely)
2. Used for water
Use the sponge filter when used for vacuum water.
• Open the clip, take out the machine head, take off the dust bag and put sponge filter on the
bottom basket.
• When finish the cleaning or the tank is full of water (that time safety valve works) please
power off and pull out the water in the bucket.
I. Open the clip, take out the machine head.
II. Pull out water, then put machine head and locked it.
III. Please dry the sponge filter after finish vacuum water.
NOTE: Never use wet or damp cloth filter for dry vacuum process. In that case always
dries the cloth filter in sun light and use it in accordance.
6