Combined Braking System - Bajaj Pulsar 135 BS VI Owner's Manual

Combined Braking system (CBS)
A
CBS Working :
• When front brake lever is pressed, then only front brake will get applied.
• When Rear brake pedal is pressed then both Rear and Front brake are applied, however it is
recommended to use both brakes simultaneously for best braking performance
Brake setting guideline in case rear wheel puncture and repair done at road side garage.
• Adjust rear brake free play by tightening force distribution unit 'A' . After adjustment ensure gap
between CBS front brake cable 2 (B) sleeve & cam lever slot (Distance C) and do not over
tighten adjuster nut (D).
• It is recommended to do setting as per guideline at authorised dealership after rear / front wheel
puncture, rear / front brake shoe replacement, CBS cable replacement, higher brake free play at
rear / front, chain play adjustment, tyre refitting, etc.
• While fitment of lever brake cam, match dot mark of Lever brake cam with brake cam dot mark
as shown in fig (E).
Note : For CBS setting bring the vehicle to BAL authorised workshop only.
B
Distance 'C'
(should be 0-1 mm)
35
D
E
Brake cam dot mark
Lever brake cam
dot mark