Table of Contents
Advertisement
Operation
Operation
1. Slide the Fuel Valve on the engine to ON.
2. Slide the Engine Choke to closed.
3. Adjust the Throttle Control to 1/3 speed setting.
8
4. Turn the Electric Start Key to START.
5. After the engine warms up, move Engine Choke to
open and adjust the Throttle Control to the desired
speed.
6. LazerVac is now ready for dust collection from the
GrindLazer.
7. To help ensure proper dust collection, momentarily
pull down on the Vacuum Release Handle every 10
minutes of operation while the LazerVac engine is
running. This helps clean the Filter Bags from
accumulated dust and debris, and transfers them to
the Vacuum Dust Collection Bag.
3A5577C
Advertisement
Table of Contents
